Volkmann PTS Powder Transfer System With Multijector G1260 Vacuum Pump, 78.94 x 59.06 x 94.49 in - 672.40 lb, Volkmann (CAT#: STEM-GLEPO-0012-LJX)

A MULTIJECTOR® comes with an advanced nozzle system, in which additional nozzles are placed in line with the primary and secondary nozzle. The suction air of each venturi stage mixed with the compressed air of the primary nozzle works as the gas jet for the following stage. For free and with no more air consumption. These additional Venturi stages don't reach the high vacuum of the first, but their larger jet chambers produce an even higher suction volume. Still the vacuum pump reaches the high vacuum of the first Venturi stage, because flap valves close automatically in order of pressure balance between their certain Venturi stage and the collective vacuum chamber.
In a vacuum conveyor the Multijector is turned on only during the suction cycle. While discharging the separator, the Multijector can easily be switched off. It requires no starting time for the next cycle like electrical pumps, also it has no wear during start and stop. The Multijector saves about 1/3 of compressed air during discharging, while electrical pumps need to run continuously and require additional vacuum valves to shut off the vacuum conveyor during discharging.

Condition: Used
CE Marked: YES
Year: Year:
Recommended Packaging Form: CUSTOM PALLET
Dimensions: Standard
Overall: 78.94 x 59.06 x 94.49 in - 672.40 lb

The device includes:
(1)Volkmann PTS Powder Transfer System With Multijector G1260 Vacuum Pump
(2)Wall Mounted Control Box
(3)Andocksysteme Active Passive Valve
(4)Trolley With Machine Parts
(5)Volkmann Stainless Steel Mobile Transfer Tank (Located Room U.198)

GEA NiroSystem Aeromatic Fielder Granulator With Watson Marlow 520S Pump and Spares, 380 VOLTS, GEA (CAT#-STEM-GLEPO-0042-LJX)
Lot of 3 Watson Marlow 620U Peristaltic Pumps, 100-240 VOLTS, Watson Marlow (CAT#-STEM-GLEPO-0016-LJX)
Unused Crated IKA Skidded Stainless Steel Hi Pressure Metering Pump Building 20 Warehouse, 415 VOLTS, IKA (CAT#-STEM-GLEPO-0031-LJX)
Low of 2 Crane Process L25-SA-EEE-Q Diaphragm Pumps, 90 DEG C, Crane Process Flow Technologies GmbH (CAT#-STEM-GLEPO-0038-LJX)