Vacuum Drying Oven MRT-DZF-1452, 1452 L (CAT#: STEM-AL-6351-ZJF)

The MRT-DZF-1452 is a laboratory vacuum drying oven designed for vacuum-assisted drying and heat treatment. It heats samples inside a sealed chamber while a connected vacuum system lowers the internal pressure. The controller regulates chamber temperature, operating time, vacuum-related functions, and any automatic valve or door sequence specified for the model. The available display and control interface support parameter entry, status review, and routine cycle operation. The chamber, platform, bath, or working surface is sized for the vessel and sample configurations stated in the technical data. Integrated monitoring and protection functions support stable operation within the specified limits. The equipment is suitable for vacuum-assisted drying and heat treatment in research, quality-control, and general laboratory workflows. Its defined configuration supports repeatable processing, consistent sample handling, and traceable operating conditions.

Model: MRT-DZF-1452
Display: 5-inch touchscreen
Operating Mode: Selectable
Power Supply: 380 V AC 50 Hz
Temperature Range: Ambient +10°C to 250°C (200°C)
Heating Time: -200°C:≤30min
Vacuum: 500Pa:≤15min
Temperature: ≤4°C ()
Temperature Resolution: 0.1°C
Stability: ±1°C
Ultimate Vacuum: 0.1kpa-100kpa
Vacuum Accuracy: 0.1kpa
Operating Ambient Temperature: 5°C-40°C
Heating Method: ()
Heating Power: 9000 W
Total Power: 9500 W
Chamber Dimensions: 1100 × 1100 × 1200
Overall Dimensions: 1500 × 1400 × 3500(H<3500mm)
Standard Shelves: 2 pcs()
Divider: 9 levels100mm levels
Opening: 485Automaticdoor opening
Bottom Load Capacity: 400 kg
Timer Range: 1-9999 (min / h selectable)
Door Configuration: Automaticdoor opening Top-opening door
Observation Window: glassYesglass
Capacity: 1452 L

Sealed vacuum chamber
Controlled thermal drying
Vacuum gauge or sensor interface
Timed operation
Temperature regulation
Laboratory sample shelves
Touch-screen operation
Selectable programmed operation