Vacuum Centrifugal Concentrator VAC-P4, Three-Unit Configuration (CAT#: STEM-AL2-1031-ZJF)

The VAC-P4 is a vacuum centrifugal concentrator for evaporating water and organic solvents from laboratory samples. It combines centrifugal motion, reduced pressure, and temperature control to support controlled sample concentration. Lowering the system pressure reduces solvent boiling temperature and enables evaporation under comparatively mild thermal conditions. Centrifugal rotation keeps samples within their vessels and helps limit foaming, splashing, and cross-contamination. The instrument is intended for biological, analytical, chemical, pharmaceutical, and general laboratory concentration workflows. It can be configured for common sample vessels including microcentrifuge tubes, glass tubes, centrifuge tubes, chromatography vials, centrifuge bottles, and multiwell plates. Programmable control supports repeatable concentration cycles while the chamber design simplifies routine handling and cleaning. Depending on the configuration, the system integrates or connects to a vacuum pump and cold trap for solvent-vapor management.

Speed range: 0-2000 rpm
Temperature control accuracy: ±1°C
Maximum centrifugal force: 590 × g
Ultimate vacuum: ≤10 Pa
Timer range: 0-99 h 59 min
Noise: ≤50 dB(A)
Cold trap temperature: -65°C/-80°C/-110°C
Total power: 2500 W
Sample chamber pre-cooling: Available
Power supply: AC 220 V, 50/60 Hz, 10 A
Centrifugal imaging: Optional
Dimensions (L × D × H): 1500 × 600 × 80
Temperature control range: Room temperature to 100°C
Weight: 230 kg
System configuration: 3 concentrator units + 1 vacuum pump + 5 L cold trap

Mobile workstation configuration
Three-unit concentrator arrangement
Large cold-trap configuration
High-flow vacuum-pump support
Five-stage chamber temperature control
Stored program operation
Touch-screen operating display
Chemical-resistant centrifugal chamber