TZC-4 Particle Analyzer, 1～260μm, Shanghai HengPing Instrument and meter Co.,Ltd. (CAT#: STEM-AI-0424-YJL)

Name: TZC-4 Particle Analyzer, 1～260μm, Shanghai HengPing Instrument and meter Co.,Ltd.
SKU: STEM-AI-0424-YJL
Rating: 5 (1 reviews)

Highlights

Settlement curve collection

When testing the sample, click the "sedimentation curve acquisition" button with the mouse, enter "particle size measurement - [data acquisition, and then perform a series of operations such as parameter setting and sedimentation curve acquisition.

data processing

Cat Number: STEM-AI-0424-YJL

Application: The instrument is suitable for the determination of dust particle size and distribution in pigments, abrasive synthetic resins, cosmetics, pharmaceuticals, glass, powder metallurgy, cement, plastics, refractories, coatings, petroleum, coal and other industries. It is a required instrument for scientific and technical personnel engaged in particle size research and testing.

Model: TZC-4

Inquiry

Description Specification Features

Description

TZC-4 Particle Analyzer, 1～260μm, model TZC-4 is manufactured by Shanghai HengPing Instrument and meter Co.,Ltd. TZC-4 particle analyzer is a particle size analyzer, which uses the sedimentation principle to determine the particle size and distribution between 1 and 260μ. The instrument consists of an electronic balance, a computer and a particle size data processing software. The computer automatically records the entire process of particle sedimentation—the sedimentation curve, performs calculations, and prints out data charts.
TZC-4 particle analyzer has the advantages of high test accuracy, simple calculation, stable performance, simple operation and easy learning, and beautiful appearance.

Specification

Large load: 100g
Temperature range: 15～25℃
Automatic recording range: 100g
Small division value: 1mg
Relative humidity: 50～85%
Temperature fluctuation: 1℃/hour
Particle size measurement range: 1～260μm
Host function: reset, tare, self-calibration, alarm
Display mode: wide viewing angle backlight LCD display
Use environment: The instrument should be placed on a stable workbench to avoid vibration, direct sunlight, severe temperature and airflow changes
Data processing: sedimentation curve collection, storage, recall; particle size, median diameter, average particle size, specific surface area determination; average error calculation; particle distribution analysis; calculation results, chart printing

Features

Settlement curve collection
When testing the sample, click the "sedimentation curve acquisition" button with the mouse, enter "particle size measurement - [data acquisition, and then perform a series of operations such as parameter setting and sedimentation curve acquisition.
data processing
After the data collection is completed, or when the stored sedimentation curve is to be calculated, click this menu to enter "Particle Size Measurement - [Data Processing]", and then perform data processing. For details, see the section on sample testing and calculation.