TSS Portable Turbidity, Suspended Solids and Sludge Interface Monitor, 0.001-4000 NTU, Hach (CAT#: STEM-DTE-0067-YJL)

TSS Portable Turbidity, Suspended Solids and Sludge Interface Monitor, 0.001-4000 NTU, model TSS Portable is manufactured by Hach. The product has a built-in bubble compensation to eliminate bubble interference, a large measurement range for the sludge interface, and a built-in calibration curve. It is an ideal remote portable turbidimeter for municipal and industrial wastewater, drinking water, and river monitoring. The turbidimeter can be used as an optimization tool in the monitoring process or as an easy way to calibrate or verify in-line sensors.

Mode of operation: single point measurement, intermittent measurement or continuous measurement
Range: Turbidity: 0.001-4000 NTU; SS: 0.001-400 g/L
Operating temperature: 0~60C
Operating pressure: 0~ 10 bar
Relative humidity: 0~95% relative humidity
Power requirements: Analyzer: 6 rechargeable Ni-MH batteries (recommended model is 1.2 V/min.1800 mAH ) or 6 "AA" standard batteries.
Integrated charger: 115/230 VAC, 50/60 Hz
Sensor cable length: 10 meters
Portable instrument protection level: IP55
Sensor protection level: IP68
Input current: about 60 mA
Wet material: sensor housing: stainless steel; sensor window: sapphire
Data storage: up to 290 measured values can be stored
Weight: Analyzer: 0.6 kg; Sensor: 16 kg
Dimensions: portable instrument: 110×230×40mm; sensor: 290×40mm; carrying case: 320×450×110mm
Warranty period: 2 years

The turbidity detector can simultaneously monitor the three parameters of turbidity, suspended solids and sludge interface
Multiple calibration curves for easy use
Easy sludge interface measurement
Bubble compensation measurement eliminates bubble interference and ensures higher accuracy
Measuring material, long service life
Powered by rechargeable batteries

TL2300/2310 Desktop Turbidity Meter, NTU: 0-4000 (CAT#: STEM-DTE-0064-YJL)
TL2300/2310 Desktop Turbidity Meter, NTU: 0-1000 (CAT#: STEM-DTE-0065-YJL)