TSB05SBTZ-TSB20TBTZ PTFE-Covered Heating Jacket, 0-150°C (CAT#: STEM-BC-2937-ZJF)

This removable heating jacket is designed to maintain vent filters and filter housings at a controlled temperature. It helps prevent condensate accumulation and reduces conditions that can support microbial growth. The system is suitable for purified-water tanks, water-for-injection tanks, stills, preparation vessels, and lyophilizer vent filters. Segmented heater power reduces excessive temperature differences between the upper and lower portions of the cartridge. An integrated overtemperature breaker interrupts heating if the temperature rises above the safety limit. Porous insulation reduces heat loss and keeps the jacket exterior near ambient temperature. A PTFE-covered hook-and-loop fastening system allows convenient installation and removal. The controller separately displays the measured heating temperature and selected setpoint. Type A and Type B insulation structures are available in 5-, 10-, and 20-inch sizes.

Models: TSB05SBTZ, TSB10SBTZ, TSB20SBTZ, TSB05TBTZ, TSB10TBTZ, and TSB20TBTZ
Jacket types: Type A and Type B
Available sizes: 5, 10, and 20 in
Rated voltage: 110 or 220 V
Dielectric withstand voltage: 1.5 kV
Insulation resistance:>5 MΩ
Insulation material: Silicone rubber
Ambient temperature range: -60 to 250°C
Adjustable operating temperature: 0 to 150°C
Overtemperature cutoff: Above 140°C
Sensor options: K-type thermocouple and PT100
Display: Red LED for measured temperature and green LED for setpoint
Type A powers: 150, 200, and 400 W
Type B powers: 100, 200, and 400 W
Jacket-to-cartridge temperature difference: Approximately 20 to 40°C

Adjustable temperature control
Condensation prevention
Segmented power distribution
Integrated overtemperature protection
Energy-saving insulation
Touch-safe external surface
Removable PTFE-covered fastening
Multiple size and power options

STEM-BC-0958-ZJF
STEM-BC-0961-ZJF
STEM-BC-1727-ZJF
STEM-BC-1769-ZJF
STEM-BC-1778-ZJF