Tissue Slide Stainer YD-700B, 120-300 Slides/Hour (CAT#: STEM-AL-2436-ZJF)

The Tissue Slide Stainer YD-700B is an automated histology instrument for processing microscope slides through staining solutions. Slide racks move through reagent, washing, and drying positions according to a selected program. Continuous or cyclic rack handling supports repeated batch operation. The control interface allows staining parameters and stored procedures to be reviewed or edited. Position recognition and calibration help place racks in the correct processing station. Liquid drainage and washing functions reduce carryover between staining steps. Alarm and anti-stall functions support safe rack transfer during operation. The stainer is intended for pathology laboratories preparing stained tissue sections for microscopic examination.

Reagent tanks: 21, including 2 washing tanks and 1 drying tank
Editable programs: 26
Program steps: 30 per program
Simultaneous rack capacity: 1-4 racks, cyclic loading supports 4-6 racks
Slides per rack: 30
Mixing frequency: 30 Hz adjustable with 2 mixing cycles
Editable mixing positions: 1-4 tanks
Single-tank processing time: 0-10,000 seconds
Transfer time between tanks: ≤1 second
Lifting frame time: 0.7 seconds
Reagent threshold setting: 0-99
Leachate retention time: 1-30 seconds
Tank volume: 550 mL, usable solution volume 350-500 mL
Drying temperature: Room temperature to 70°C adjustable
Throughput: About 120-300 slides/hour
Voltage and frequency: 220 V ±5 V, 50 Hz
Power: ≤400 W excluding hot water
Dimensions: 1250 × 500 × 550 mm

Embedded PC control
High-speed low-noise manipulator
Real-time touch-screen parameter display
Editable and stored staining programs
Self-check and position calibration
Hydrophobic staining frames
Controlled air drying
Constant-pressure slide washing