Three-Position Electrospinning Nozzle Holder, 18G-22G (CAT#: STEM-AL-5567-ZJF)

The three-position electrospinning nozzle holder is a laboratory multi-needle distribution head designed for holding three stainless-steel electrospinning needles. It divides one liquid path into three needle positions to increase simultaneous jet capacity. The needle spacing is arranged to limit interaction between adjacent spinning jets. Luer needle seats allow individual stainless-steel needles to be removed quickly. A through-bore internal path supports cleaning after use. PEEK end plugs provide chemical resistance at the sides of the holder. An O-terminal screw point provides a secure high-voltage connection. Three mounting holes allow the holder to be fixed to a suitable insulating support.

Needle Positions: 3
Compatible Needle Gauges: 18G-22G
Needle Interface: Luer seat
End-Plug Material: PEEK
High-Voltage Connection: O-terminal screw point
Mounting Holes: 3
Flow Path: Full through-bore
Pressure Integrity: Pressure-tested for viscous solutions

Three-needle parallel output
Balanced needle spacing
Quick-change Luer needle seats
Cleanable through-flow channel
Corrosion-resistant end plugs
Secure high-voltage terminal
Multi-hole mounting interface