Thermo Section Flotation Bath Section Bath, Thermo Fisher Scientific (CAT#: STEM-GLE-1613-LGZ)

The manufacturer of Thermo Section Flotation Bath Section Bath is Thermo Fisher Scientific. Model is Section Flotation Bath. Typical applications of tissue flotation water baths are in the preparation of tissue paraffin sections and to eliminate wrinkling and deformation of tissue sections.

Condition: used
Temperature range: 30 to 65 ± 1.5 at 20 ambient
Dimensions, external (WxDxH), mm: 275 x 325 x 107
Dimensions, (Bowl diameter x depth) mm: 222 x 85
Mass, kg: 3.75
Electrical supply: 220 to 240 V 50/60 Hz

1. While maintaining moisture at a constant temperature, flatten the wax or resin section and lift it onto a microscope slide.
2. In addition to corrosive substances, it is also used for heat dyeing.
3. The unit on the top edge has a lot of room to dry the slides.
4. Controls have been embedded to provide additional safety measures.
5. A drop-in stainless steel lid is provided to cover the bowl when not in use.
6. The deep conical bowl is made of stainless steel to provide maximum corrosion resistance.
7. Both the oil bowl and the upper sleeve are coated with matte black PTFE for visual contrast with the wax layer.
8. The lower steel casing has an epoxy resistant coating.
9. Power cables have molded connections at both ends.
10. The power socket on the back of the unit has fuses on the negative and positive lines for optimum protection.

PolyScience AD28S150-A12E Water Bath, PolyScience(CAT#-STEM-GLE-2333-LGZ)
Buchi B-480 Heated Water Bath, Buchi Laboratoriums-Tecknik(CAT#-STEM-GLE-2334-LGZ)
Buchi B-481 Heated Water Bath, Buchi Laboratoriums-Tecknik(CAT#-STEM-GLE-2335-LGZ)
Buchi B-490 Heated Water Bath, Buchi Laboratoriums-Tecknik(CAT#-STEM-GLE-2336-LGZ)
Cambridge Scientific CSP-12 Water Bath, Cambridge Scientific(CAT#-STEM-GLE-2337-LGZ)
Cambridge Scientific CSP-22 Water Bath, Cambridge Scientific(CAT#-STEM-GLE-2338-LGZ)