Temperature-Controlled Vortex Mixer TPS1000, 200-3000 RPM (CAT#: STEM-AL-6558-ZJF)

Temperature-Controlled Vortex Mixer TPS1000 combines controlled temperature processing with mechanical sample mixing in a single laboratory platform. It is intended for incubation, reaction, mixing, and sample preparation workflows that benefit from simultaneous heating and agitation. Electronic temperature regulation maintains the selected thermal condition while the drive system provides repeatable mixing motion. The operating functions can be coordinated to support heating, shaking, or combined processing according to the configured mode. Compatible sample modules or adapters provide physical support for the vessel formats specified for the instrument. Programmable timing and operating controls support standardized processing across repeated runs. The integrated platform reduces the need to transfer samples between separate heating and mixing devices. The unit is designed for benchtop laboratory use in workflows requiring controlled thermal mixing.

Model: TPS1000
Temperature Control Range: Ambient +5 C-105 C
Timer Range: 1sec-99min59sec/1min-99h59min/∞
Temperature Accuracy: ≤±0.3 C
Display Resolution: 0.1 C
Temperature Uniformity: ≤±0.3 C
Speed Range: 200-3000RPM
Orbital Amplitude: 2mm
Heating Time: ≤10 min(25 C 100 C)
Cooling Time: ≤12 min(100 C 37 C)
Heated Lid Temperature Setting Range: OFF/AUTO/0 C-110 C
Heated Lid Control Range: Ambient +5 C-110 C
Heated Lid Heating Time: ≤10 min(25 C 110 C)
Independent Heated Lid Control: Supported
Automatic Fan Cooling: Supported
Program Segment Storage: 10 segments
Multi-Point Program: Supported, max 5 )
Multi-Point Cycles: Supported, max 99 cycles)
Automatic Preheating: Supported
End-of-Run Temperature Hold: Supported
Heated Lid Control Mode: Automatic/Manual2
Auto-Run at Power-On: Supported
Power-Loss Recovery: Supported
Delayed Countdown: Supported
Sample Capacity: plates
Input Power: 335W
Voltage: AC220V/50-60HZ
Fuse: 250V 3A phi5x20
Overall Dimensions: 296x212x164mm
Weight: 6.9kg
Optional Module: wells diameter | notes
MD30: 96x0.2ml(0.2ml PCR plate) | max 2500Rpm
MD31: 54x0.5ml( centrifuge tubes) | max 2500Rpm
MD32: 35x1.5ml( centrifuge tubes) | max 2500Rpm
MD33: 35x2.0ml( centrifuge tubes) | max 2500Rpm
MD34: 15x0.5ml+20x1.5ml( centrifuge tubes) | max 2500Rpm
Without Module: 96x0.2ml( microplate, deep-well plate ) | max 3000Rpm

Combined heating and shaking
Programmable operating time
Controlled orbital mixing
Sample-module or adapter support
Digital operating control
Benchtop integrated processing
Independent or combined function operation