SZC-101 Automatic Fat Meter, 560×370×700MM, Shanghai XianJian Instrument Co., Ltd. (CAT#: STEM-AIAE-3371-LGZ)

SZC-101 automatic fat analyzer is based on Soxhlet extraction and weight determination as the basic principle, which integrates soaking, extraction, heating, condensation and solvent recovery. It adopts the form of automatic temperature control and fully sealed electric heating, which makes the heating of the instrument more uniform, safe and reliable, and has good sealing measures. At the same time, it can test 1~6 samples without leakage of three wastes. During operation, it can be operated according to the boiling point and temperature of the reagent. The temperature is selected according to the natural temperature, so as to achieve the purpose of rapidity; the reagent can also be recycled to reduce the cost of the test, and the soaking, extraction and solvent recovery can be completed at one time. Therefore, the instrument has the advantages of reasonable design, stable performance, good repeatability, high precision, convenient operation, labor saving and time saving.

Operation mode: manual and automatic integration
Test range: Crude fat content ≥ 0.1%
Sample weight: solid 1~10g
Test Quantity: Test 1 to 6 samples at a time
Solvent recovery method: automatic storage and recovery
Solvent recovery rate: ≥85%
Test Accuracy: Repeatability≤0.8%
Measurement time: average 3 hours
Temperature control range: room temperature～200°C
Temperature control accuracy: ±0.3°C
Display mode: 2.5 inch blue screen LCD
Recovery rate: ≥99% (cooling water temperature >4°C, ≤26°C)
Shell parameters: sheet metal shell, surface spray treatment
Sealing material: tetrafluoroethylene
Extraction bottle size: 70ml
Heating module: well-type aluminum heating block (with insulation layer)
Heating characteristics: automatic constant temperature adjustable, over-temperature protection
Drying function: support
Rated power: 500W
Rated voltage: 220V±10%, 50～60HZ
Dimensions: 560×370×700(mm)
Weight: 32kg

It adopts closed electric heating, and the temperature can be adjusted arbitrarily between room temperature and 200°C.
2.5-inch blue screen LCD display, simultaneously display the set temperature and the actual temperature, the heat preservation time countdown display, and alarm when it arrives.
Solvents are automatically recovered and stored.
No cock design: avoid leakage and glass tube damage caused by frequent turning of the cock, and effectively improve the sealing and service life.
Temperature limit protection: The upper limit of temperature can be set. When the actual temperature exceeds the upper limit, the instrument will automatically alarm and stop heating.
Automatic 6-stage heating: The manufacturer recommends that the temperature and holding time of 4 consecutive stages can be set, and the instrument will automatically complete it in sequence.
Drying function: no need to transfer the sample to the oven, it can be directly dried on the instrument.

MF-105 Fat Meter, 580×360×620, Shanghai XianJian Instrument Co., Ltd. (CAT#-STEM-AIAE-3368-LGZ)
MF-106 Milk Fat Analyzer, 600×400×640MM, Shanghai XianJian Instrument Co., Ltd. (CAT#-STEM-AIAE-3369-LGZ)
SZC-101S1 Automatic Fat Meter, 640×435×700MM, Shanghai XianJian Instrument Co., Ltd. (CAT#-STEM-AIAE-3370-LGZ)
SZC-D Fat Meter, 590×390×625MM, Shanghai XianJian Instrument Co., Ltd. (CAT#-STEM-AIAE-3372-LGZ)
PQZF-1000 Fully Automatic Fat Analyzer, Measurement Range 0.1%-100%, SHANGHAI PEIOU ANALYSIS INSTRUMENT CO.,LTD (CAT#-STEM-AIAE-3393-LGZ)
PQSZF-06N Dry Heating Soxhlet Extractor/Fat Meter, 230*350*780MM, SHANGHAI PEIOU ANALYSIS INSTRUMENT CO.,LTD (CAT#-STEM-AIAE-3394-LGZ)