Single-Use Pressure Sensor, SPC, 45 PSI (CAT#: STEM-BC-0092-ZJF)

The SPC single-use pressure sensor is designed for measuring static and dynamic pressure of gases and liquids in process systems. It uses a clear internal flow path without dead zones. The sensor can be connected to a display through an integrated connector for pressure reading. It is compatible with most prequalified third-party pressure reading devices. The product can be used for pressure monitoring during perfusion, chromatography, filtration, pump operation, and bioreactor exhaust. Different connector formats support hose barb, Luer, and TC fluid paths. Versions are available with or without calibration certificates. The sensor is suitable for disposable monitoring points in bioprocess fluid assemblies.

Body material: Polysulfone PSF or polycarbonate PC
Sterilization tolerance: 25 to 45 kGy gamma irradiation
Temperature range: -25 to 65°C
Alkali resistance: PSF tolerates 0.5 M NaOH for 48 h and PC is not alkali-resistant
Accuracy range: ±2% from 0 to 6 psi, ±3% from 6 to 30 psi, ±5% from 30 to 45 psi
Measurement range: 0 to 45 PSI
Input resistance: 295 to 365 Ω
Output resistance: 285 to 315 Ω
Zero-pressure output range: -20 mmHg to 20 mmHg
Output voltage: 0.2584 mV/V/psi
Connector options: 1/4 inch HB, 3/8 inch HB, 1/2 inch HB, Luer, 3/4 inch TC, 1 1/2 inch TC

Clear internal flow path without dead zones
Measures gas and liquid pressure
Supports static and dynamic pressure monitoring
Plug-and-use connection to pressure readers
Compatible with most pressure reading devices
Available with calibration certificate options
Multiple fluid connection formats
Suitable for filtration and bioreactor pressure monitoring

STEM-BC-2617-ZJF
STEM-BC-2626-ZJF
STEM-BC-2627-ZJF
STEM-BC-2631-ZJF
STEM-BC-2634-ZJF