Shinetek Digtor 22 C-U Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#: STEM-LC-3100-LGZ)

The rotor accepts 6-inch and 8-inch tubes, pear-shaped tubes and 12.5ml tubes, without heating function.
Maximum load capacity: 4 x100ml (8/6”); Maximum centrifugal force/speed: 2425xg / 3000RPM
Comply with standards: ASTM D 91, D 893, D 2273, D 2709, D 5546, API 2542, API 2548, BS 4385, DIN 51793.
In the non-centrifugal state, the centrifuge tube is upright.
GRS: Extraction system (optional accessory), pre-installed.

Dimensions w x d x h mm: 540 x 650 x 400
Net weight Kg:77
Voltage V:220-230
Current Hz: 50-60
Power W: 400

Safety
* Safety system for centrifuge cover
- Automatic locking lid, mechanical double lock
- Emergency cover unlock function
- Lock cover protection during operation
- Protection against sudden drop of cover
- Sight holes in the cover for operation inspection
* If there is no balance check, it will automatically stop
* There is an Anquan protective layer between the centrifugal chamber and the shell
* The centrifuge chamber is made of stainless steel (easy to clean)
* The rotor is removable when the cover is closed
* Both rotor and adapter are autoclavable for easy installation
* Forced internal air flow can reduce temperature increase
* Energy saving setting with automatic power off option setting

TFT color display, observable distance over 3m
* Display RPM/RCF, time, acceleration/deceleration digital (PCBS), with untrimmed positioning function (ULS)
* Speed control, step 10RPM/10xg
* RCF real-time display function based on actual use of the accessory.
* Countdown or countdown function, reaching the set RPM/RCF timing function to ensure the reproducibility of the experiment
* Timing is set from 1min-99h program, step 1s, with step-by-step and stop program function
* PCBS function: progressively controlled acceleration and braking system up to 175 selectable slopes, preventing homogenization of samples after separation.
* ULS function: if there is an untrim situation, it will directly display the untrim position number of the rotor.
* 40 sets of program memory with password protection function
* There are different prompt sounds and screen information prompts to display the operation of the device in real time

Easy to use
* Microcomputer program control
* Brushless maintenance-free motor
* Rotor and adapter memory function
* Noise level, below 60dB
* With start, stop, cover opening and instantaneous centrifugation functions
* Speed can be adjusted by RPM/RCF during operation.
* It can be set to automatically open the cover through the program
* Automatically memorize the parameter setting value after Z
* Automatic rotor recognition, overspeed protection

EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1

Shinetek DIGTOR 22 Benchtop Centrifuge, 540 x 650 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3097-LGZ)
Shinetek CONSUL22R Large Capacity Centrifuge, 670 x 770 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3092-LGZ)
Shinetek Cytocentrifuge Benchtop Centrifuge (Life Science), 410 x 530 x 320mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3093-LGZ)
Shinetek DIGICEN 21 Program Controlled Centrifuge, 410 x 530 x 320mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3094-LGZ)
Shinetek DIGICEN 21R Program Control Centrifuge, Shinetek Instruments Research Institute (CAT#-STEM-LC-3095-LGZ)
Shinetek Digtor 21 col Benchtop Centrifuge (Life Science), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3096-LGZ)