Shimadzu SIL-HTC HPLC Autosampler, Shimadzu (CAT#: STEM-C-0283-LGZ)

The manufacturer of Shimadzu SIL-HTC HPLC Autosampler is Shimadzu. Model is SIL-HTC.To be used with a Shimadzu 10 HPLC System.

Condition: used
Sample injection system: Total sample injection, variable sample injection system (zero sample loss during injection)
Settable range of injection volumes: to 100 µL (standard), or 1 to 2000 µL (option) (0.1µL steps from 0.1 to 0.9µL, and 1µL steps from 1 to 2000 µL)
Sample processing capability:
With 1-mL vials: 350
With 1.5-mL vials: 140
with 4-mL vials: 100
With micro plates: 4 (96 wells: 284, 284 wells: 1536)
with deep well plates: 4 (96 wells: 284, 284 wells: 1536)
Injection volume repeatability: RSD: 0.3% max. (at 10µL injection)
Cross contamination: 01% max. (for analysis of naphthalene)
Injection volume accuracy: Less than +/- 1% (50µL)
Injection volume accuracy correction: Possible
of injections: 1-99 times per sample
Setting of analysis time: .01– 9999.9 (0.1 minute increments to 999.99 min., 0.1 minutes increments over 1000 min.)
Number of steps for injection conditions: Max 102 steps
Sample suction speed: 1-15 µL/sec (0.1µL/s step for 0.1-0.9 µL/sec., 1µL/s step for over1 µL/sec.)
Rinsing liquid suction speed: 1-35 µL/sec/ (1µL/s step)
Maximum pressure: 20.0 Mpa (standard pippings of sample flowpath is PEEK)
Sample cooler (SIL-HTc only)
Method: Direct cooling method (at a setting of 4 deg. C, room temperature must be less than 30 deg. Cand humidity less than 70%)
Temperature setting range: 4 to 40 deg. (cooling down to 4 deg. C for room temperature up to 30 deg. C and humidity to 70%)
Operating ambient temperature range: 4 to 35 deg. C

1. One of the best autosamplers for injection speed, injection capacity, and minimization of sample carryover from high absorption sample assemblies.
2. Maximize throughput with fast injection and high sample capacity.
3. The injection speed is 15 seconds, and 10 µL of sample is injected.
4. Sample injection system: total sample injection, variable sample injection system (zero sample loss during injection), setting range of injection volume: 0.1 to 100 µL (standard), or 1 to 2000 µL (option) < (0.1 µl is 0.1 ~ 0.9 µL, 1 µL is 1 ~ 2000 µL).

Agilent 1200 Series - G2260A HPLC Preparative Autosampler, Agilent Technologies(CAT#-STEM-C-0079-LGZ)
Agilent 1260 Series - G1377A HPLC Well Plate Autosampler, Agilent Technologies(CAT#-STEM-C-0089-LGZ)
Agilent 1260 Series- G1329B HPLC Autosampler, Agilent Technologies(CAT#-STEM-C-0091-LGZ)
Thermo Scientific Accela Autosampler HPLC Autosampler, Thermo Fisher Scientific(CAT#-STEM-C-0129-LGZ)
Rainin AI-200 Autosampler, Rainin(CAT#-STEM-C-0144-LGZ)