Salmonella Typhimurium Dye-Based qPCR Kit, 50 Tests/Box (CAT#: STEM-SLSR-0324-ZJF)

This real-time PCR detection kit is based on SYBR Green fluorescence chemistry and is intended for the analysis of Salmonella Typhimurium nucleic acids. Primers targeting conserved regions enable specific amplification. During the reaction, fluorescent signals are emitted and continuously tracked by the system, providing reliable, real-time quantification and identification of the target sequence.

Kit Components:
Salmonella Typhimurium Amplification Mix: 50 µL × 1 tube
Salmonella Typhimurium Reaction Mix: 950 µL × 1 tube
Salmonella Typhimurium Positive Control: 50 µL × 1 tube
Salmonella Typhimurium Negative Control: 50 µL × 1 tube
Instruction Manual: 1 copy
Note 1: Components from different lot numbers must not be used interchangeably.
Note 2: The kit components are sufficient for the number of tests specified on the label.
Storage Conditions and Shelf Life:
-20°C ± 5°C, protect from light; avoid repeated freeze-thaw cycles (less than 7 times); shelf life is 12 months.
Applicable Instruments:
1.5 mL DNase/RNase-free centrifuge tubes
0.2 mL PCR reaction tubes
Filter tips (specifications: 10 µL, 200 µL, 1000 µL)
Centrifuge, vortex mixer, micropipettes of various specifications
Agarose, electrophoresis tank, power supply, gel imaging system
Sample Requirements:
Acceptable sample types include food, feces, vomit, oral samples, saliva, nasal/throat/eye/anal swabs, and virus cultures.
Cross-contamination should be avoided. Samples should be tested immediately after collection or stored at -20°C ± 5°C. For long-term storage, keep below -70°C.
Sample Storage and Transport:
Samples can be stored short-term at -20°C.
For long-term storage, keep below -70°C (no longer than 6 months).
During transportation, use 2-8°C ice packs. Repeated freeze-thawing is strictly prohibited.

Supplied in a ready-to-use format—just add DNA template.
Primers designed from conserved regions for maximum target specificity.
High sensitivity ensured through optimized primer/probe design.
Includes positive control to distinguish false negatives.
Single-tube fluorescence PCR minimizes contamination risk.
For research use only.

STEM-SLSR-0322-ZJF
STEM-SLSR-0323-ZJF
STEM-SLSR-0325-ZJF
STEM-SLSR-0326-ZJF