S-Fact P1200 High-Throughput Reagent Dispensing Workstation, Twelve Independent Pumps (CAT#: STEM-BC-3407-ZJF)

The S-Fact P1200 is a high-throughput reagent dispensing workstation with twelve independent peristaltic pumps. It can dispense up to twelve different reagents during the same production run. Each channel allows an independently assigned dispensing volume. The workstation supports 96-well plates, centrifuge tubes, and other common laboratory containers. Users can calibrate the tubing, select plates, count completed units, and set production targets. Plate positions support horizontal or vertical orientation and independent row or column selection. Dispensing needles can enter the wells to reduce splashing and improve placement. A 96-well plate filled at 500 μL per well can be completed in approximately six seconds.

Dimensions: 800 × 450 × 220 mm
Plate positions: 4 or 6 × 96-well plates with position detection
Operating temperature: 10-40°C
Relative humidity: <80%
Pump type: B220 or customized, 12 units
Interface: 7-inch Chinese color touchscreen
Program storage: 100 dispensing programs
Rated power: 450 W
Calibration storage: 10 groups
Minimum dispensing volume: 30 μL
Error: ±3%
Maximum motor speed: 600 rpm
Noise: ≤60 dB
Reagent channels: 1-12
Performance: One 96-well plate at 500 μL per well in approximately 6 s
Tubing: TY-103-12A 1.6 mm ID or TY-103-12B 0.8 mm ID
Pump head: DMD15-13 low-pulsation
Motor: J-4218HB3401
Touchscreen: RK6570A
Power supply: LRS-200-24, 24 V

Twelve independent pumps
Up to twelve reagents
Six-second plate filling
Independent channel volumes
Plate-position detection
Row and column selection
Cleaning and aspiration
Production counting and targets

STEM-BC-0964-ZJF
STEM-BC-3410-ZJF