Pulsating Vacuum Sterilizer DGT-8B/DGT-12B/DGT-18B/DGT-23B, 116-134°C (CAT#: STEM-AL2-4138-ZJF)

The DGT B series is a compact pulsating-vacuum steam sterilizer range with automatic microcomputer control. An electronic door interlock secures the stainless steel chamber during the operating cycle. The controller manages the complete sterilization process and includes automatic fault detection. An altitude-adaptive system performs atmospheric-pressure calibration for the installation environment. Multiple preset sterilization programs and dedicated test programs are available from the control interface. The system uses repeated vacuum pulses before steam exposure to support air removal from the load. A built-in independent steam generator supplies saturated steam for the cycle. The series is intended for automated steam sterilization workflows requiring vacuum processing, drying, cycle records, and repeatable preset operation.

Models: DGT-8B / DGT-12B / DGT-18B / DGT-23B
Capacity: 8 / 12 / 18 / 23 L
Power: 2.2 kW each
Voltage: AC 110 V 60 Hz or AC 220 V 50 Hz
Design Pressure: -0.1 to 0.25 MPa
Design Temperature: 139°C
Rated Working Pressure: 0.22 MPa
Rated Working Temperature: 134°C
Sterilization Temperature: 116-134°C
Sterilization Time: 4-120 min
Drying Time: 0-240 min
Chamber Size: Ø170 x 320 / Ø200 x 355 / Ø250 x 360 / Ø250 x 450 mm
Overall Size: 445 x 580 x 400 / 445 x 580 x 400 / 600 x 475 x 445 / 680 x 475 x 445 mm
Packing Size: 640 x 500 x 450 / 640 x 500 x 450 / 710 x 560 x 510 / 750 x 560 x 510 mm
Gross/Net Weight: 49/40 / 51/42 / 60/49 / 63/51 kg
Preset Programs: 9
Test Programs: 3
Pulsating Vacuum: 3 cycles

LCD operating display
Electronic safety door interlock
Stainless steel chamber
Full-process microcomputer control
Automatic fault detection
Altitude-adaptive pressure calibration
Three-stage pulsating vacuum
Built-in printer and USB interface