ProODO Sensor Cap, YSI (CAT#: STEM-AIAE-0527-ZJF)

The ProODO Sensor Cap is manufactured by YSI.
Replacement ODO sensor cap kit for the YSI ProODO dissolved oxygen meter.
The YSI ProODO sensor cap is a replacement ODO sensor cap kit for the YSI ProODO dissolved oxygen meter.
It is an accessory for the following products:
YSI ProODO Dissolved Oxygen Meter

SKU: 626320
Equipment used with: ProODO

Screw-on sensor cap
Includes calibration code sequence
Average life is 1 year or greater
Response Time (T95 - from 0 to 100%) = 40 seconds
Flow Dependence After 4 Minutes = 0%
Required Flow Rate = 0 inches/second
Non-consumptive optical method

900 Chlorine Colorimeter, Chlorine Free: 0.02 to 2.0 mg/L, Chlorine Total: 0.1 to 8.0 mg/L, YSI
9300 Photometer, 100+ Parameters, YSI
EcoSense DO200A Dissolved Oxygen Meter, DO % Air Saturation: 0 to 200%, DO: 0 to 20 mg/L, Temperature: 0 to 50°C, YSI
EcoSense EC300A Conductivity Meter, YSI
EcoSense ODO200 Dissolved Oxygen Meter, DO % Air Saturation: 0 to 200%, DO: 0 to 20 mg/L, Temperature: 0 to 50°C, YSI
EcoSense pH1000A Benchtop pH Meter, -2.0 to 16.0 pH units, -1999.9 to 1999.9 mV, 0 to 100 °C, YSI
EcoSense pH100A Meter, pH: -2 to 16 units, mV/ORP: -1999 to +1999 mV, Temperature: -10 to +120°C, YSI
MultiLab 4010-1W Laboratory Instrument, YSI
pHotoFlex STD (Standard) Colorimeter, 85 Parameters, YSI
Pro10 pH Meter, pH: -2 to 14 units, Temperature: -5 to 55°C, ORP: -1500 to +1500 mV, YSI
TruLab pH 1110 Laboratory Instrument, 1 Channel, YSI