Programmed LED Climate Chamber, 2500W, Working Chamber Size 600×550×750 mm, Dimensions 780×795×1575 mm, Shanghai Jing Hong Laboratory Instrument Co., Ltd (CAT#: STEM-GLE-0146-LGH)

LED illumination incubator, GZP-250Y, Shanghai Jing Hong Laboratory Instrument Co.,Ltd
1. The mirror stainless steel inner tank, four corners of the semi-arc transition, partition bracket can be free loading and unloading, easy to clean the box.
2. Double door structure, good heat insulation performance. The inner door adopts full-toughened glass door. Open the outer door to observe the situation in the box without affecting the temperature in the box.
3. Microcomputer program control temperature, illuminance, can simulate the daytime and night temperature and illuminance changes.
4. With overtemperature alarm system, over the set temperature will send sound and light alarm and cut off the heating system, to ensure the safe operation of equipment.
5. New fluorine free design, advanced LED light source lighting, high efficiency, energy saving, promote emission reduction.
6. Program controlled lighting incubator (S-type) with 30 segments programmable temperature controller, can set up a maximum of 30 segments of temperature change, with
7. Artificial climate box is a set of temperature, humidity, illumination control and one. 30 section programmable controller can simulate natural climate to the maximum extent.
8. Change optional USB data export interface.

Power supply voltage: AC 220V，50HZ
Temperature control range (℃): no light：0～50℃，light：10～50℃
Temperature resolution: ±1℃
Control range of wet: 50-90%RH
Humidity deviation: 5%RH
Consumed power: 2500W
Illuminance: ≥20000 Lux
Volume: 250L
Working chamber size (mm): 600×550×750
Dimensions (mm): 780×795×1575
Carrier bracket (standard): 2

Large touch LCD screen, easy program editing
Temperature and humidity adopt high precision PID control
There are fixed values and segment modes to choose from