PI-52 PID Detector, HNU (CAT#: STEM-CPO-0267-ZJF)

The manufacturer of the PI-52 PID Detector, HNU is HNU.
HNU PI-52 PID Detectors with accessories.
The Model PI52 has a PID, a power supply for the lamp and bias and an electrometer. The electrometer output is 0-10 VDC. The customer needs a separate ADC channel to feed the signal into the GC’s data system. Alternately, PID Analyzers sells a data system (Model 50) that will feed the signal into a separate PC.

Condition: Refurbished, Certified Pre-owned
Species measured: Organics (VOCs) and inorganic species that can be ionized by the UV lamp (9.5, 10.6, 11.7)
Electronics enclosure (PI52):
Weight: 3 lbs.
Range: > 5 x 107
Power consumption: < 2 amps @ 115V
Detector: 2.5'' D x 5.5'' L
Dimensions: 10'' L x 3'' W x 2.25'' D
Instrument operating conditions: 5-40 degrees C, 0-95% RH (non-condensing).

Easy to install
High sensitivity: pg or sub pg detection limits - most sensitive PID available
Display (PI52 only): Our 2 line by 16 character display can be backlit; used for range and background readings.
Selectivity: Improves separations and analysis of trace species.
Adaptability: Is readily adaptable to any chromatograph.
ADC: Our 16 bit ADC provides a resolution of 1 part in 64,000 and our signal algorithm minimizes noise by signal averaging in the msec range
Wide linear dynamic range: > 107
Non destructive: Detectors can be run in-series.
50-200 times more sensitive than the FID
Used by environmental agencies worldwide
Programmable Voltage output: 0-10VDC (PI52 only)

G2070AA ChemStation Family GC Software, Agilent Technologies
HP 18593A Autosampler Injector Tower, Hewlett Packard
HP 18593B Automatic Liquid Sampler Injector, Hewlett Packard