Ohaus SHHD6850DG Orbital Shaker, Ohaus (CAT#: STEM-CC-1992-LGZ)

The manufacturer of Ohaus SHHD6850DG Orbital Shaker is Ohaus. Model is SHHD6850DG. The Ohaus SHHD6850DG digital 68kg capacity orbital shaker is the largest capacity shaker designed for the heaviest loads. They have the most powerful drive mechanism of all shakers and large tracks for optimal vibration of large vessels with a track of 2 inches. With load capacities ranging from 150 lbs and over 70 accessory options, microprocessor control provides variable speed and vibration is consistent while ramping to a set speed. The microprocessor displays the last set value and restarts if the power supply is interrupted. Built-in tray and non-slip rubber pads include SHHD6850DG. The exclusive Accu-Drive shake system on digital models uses dual speed sensors, monitoring is continuous and shake speed is maintained - providing superior speed control, accuracy and durability. A trackpad with individual LEDs controls speed/time and the operator can view all settings at once. The timer displays the elapsed time or is programmed to a set time and will turn off when the time reaches zero. The speed ramp function slowly increases the speed to the desired setpoint and splashing is avoided. The load cell detects unbalanced conditions and automatically reduces the rotational speed to a safe speed where the sample is protected.

Condition: used
Motion: Orbital, 51 mm
Capacity: 68 kg
Speed Range: 15 rpm – 300 rpm
Item Number: 30391884

1. RS232 interface: provides two-way communication for data logging and unit control.
2. Speed ​​calibration mode: The user can automatically recalibrate the speed display.
3. Construction: Cold Rolled Steel (CRS) and Stainless Steel, External Control Module, Thin Ribbon Cable (5.5 ft or 1.7 m) can easily pass under the incubator door or through the incubator's utility port.
4. Design features: Built-in tray (11x13 inches or 28x33 cm) with non-slip rubber pads (included).
5. Communication: RS232 interface provides two-way communication, which can be used for data logging and unit control (digital model).
6. Operation mode: The three-wire cord and plug (included) are detachable.
7. Load sensor: The built-in load sensor detects the unbalanced situation and automatically reduces the speed to a safe speed, the sample can be protected.
8. Overload protection: When the system detects that the pallet is blocked or overloaded, the sound and visual signal will be activated.
9. Speed ​​ramp function: Slowly increase the speed to the desired set value, splashing is avoided.
10. Sound alarm: timing mode, when the time is zero, the alarm sounds. The alarm has an optional mute function, which can be set via the touchpad control.
11. Anti-spill design: directs liquid away from internal components.

Ohaus SHHD1619DG Orbital Shaker, Ohaus(CAT#-STEM-CC-1860-LGZ)
Ohaus SHHD2325AL Orbital Shaker, Ohaus(CAT#-STEM-CC-1861-LGZ)
Ohaus SHRK04DG Orbital Shaker, Ohaus(CAT#-STEM-CC-1862-LGZ)
Ohaus 201015003 Shaker, Ohaus(CAT#-STEM-CC-1873-LGZ)
Ohaus 201102004 Shaker, Ohaus(CAT#-STEM-CC-1874-LGZ)
Ohaus 201103002 Shaker, Ohaus(CAT#-STEM-CC-1875-LGZ)