Millex Syringe Filter, Hydrophilic PTFE, Non-Sterile, 0.2 µm Pore Size, 25 mm Diam., Merck KGaA, Darmstadt, Germany (CAT#: STEM-L-6785-LC)

The Millex Syringe Filter, Hydrophilic PTFE, Non-Sterile manufactured by Merck KGaA, Darmstadt, Germany is ideal for solvent filtration, sample filtration before UHPLC, HPLC, LC-MS, and MS, as well as clarification of aqueous and organic solutions.

Material: PTFE membrane, high-density polyethylene housing
Sterility: Non-sterile
Holdup volume: <100 μL (after air purge)
Process volume: 100 mL
Max. inlet pressure: 6.9 bar (100 psi)
Max. temp.: 45°C
H: 19.8 mm
Filter diam.: 25 mm
Filtration area: 3.9 cm2
Pore size: 0.20 μm
Fitting: Female Luer-Lok^® inlet connection

Lowest extractables

Millex Syringe Filter, Hydrophilic PTFE, Non-Sterile, Replaced by SLCRX13TL, 0.45 µm Pore Size, 13 mm Diam., Merck KGaA, Darmstadt, Germany (CAT#: STEM-L-6786-LC)