Microplate Centrifuge MPC2800, 550 x g (CAT#: STEM-AL-6591-ZJF)

Microplate Centrifuge MPC2800 is a laboratory centrifuge for controlled separation or spin-down of compatible samples. It is intended for tubes, microplates, cards, or other formats specified for the model. The motor-driven rotor generates centrifugal force to move suspended material according to density and sample geometry. Adjustable speed and timing controls support repeatable centrifugation protocols. The rotor or carrier arrangement secures the supported labware during operation. Safety monitoring functions are incorporated where specified to support controlled operation. The benchtop design is intended for routine sample-preparation and analytical workflows. The instrument provides reproducible centrifugal processing without manual handling during the run.

Model: MPC2800
Speed Setting Range: 2200-2800Rpm
Timer Range: 15 s -1 min59 s
Maximum RCF: 550g
Acceleration Time: ≤10 s(0 2800Rpm)
Braking Time: ≤4 s(2800 0Rpm)
Lid-Open Stop: Supported
Short-Run Mode: Supported
Capacity: 2 platesstandardPCR microplate
Input Power: 45W
Voltage: AC110-220V/50-60HZ
Fuse: 250V/3A phi5x20
Overall Dimensions: 260x240x226mm
Weight: 3.3Kg

Motor-driven centrifugal separation
Programmable speed control
Timed centrifugation
Dedicated rotor or carrier
Benchtop sample-processing format
Run-safety monitoring
Repeatable centrifugal processing