Masterflex L/S® Analog Variable-Speed Console Drive with Easy-Load® II Pump Head for High-Performance Tubing, 20 to 600 rpm; 115 VAC, Cole-Parmer (CAT#: STEM-DS-0090-LC)

The Masterflex L/S® Analog Variable-Speed Console Drive System manufactured by Cole-Parmer is suitable for general fluid transfer applications. It is compact and cost-effective.

Control Type: Variable-Speed Analog
Pump Series: L/S
Min RPM: 20
Max RPM: 600
Number of Channels: 1
Max Flow Rate Per Channel (mL/min): 1700
Min Flow Rate Per Channel (mL/min): 56
Drive: 07555-05 (L/S® Economy Console Drive)
Pump Head: 77200-62 (L/S® Easy-Load II Pump Head)
Tubing: 06434-24, 10-ft (C-FLEX® Ultra, L/S® 24)
Tubing sizes accepted: L/S® 15, 24, 35, 36
Drive IP rating: IP 22
Power (VAC): 115
Power (amps): 0.8
Power (Hz): 50/60
Width (in): 9
Height (in): 5.25
Length (in): 9.28
Width (cm): 22.86
Height (cm): 13.34
Length (cm): 23.57
Housing Material: Painted Steel and ABS Plastic
Remote I/O: Start/Stop

Single-turn speed control for easy operation
Thanks to the separate power switch, the speed setting will keep stable while turning drive on/off; front-panel LED indicates power on
Reversible motor enables you to prime/purge tubing and pump in either direction
DB9 connector for remote control of start/stop
Depending on the drive rpm, pump head, and tubing size, flow rate range is 16 to 480 mL/min

Masterflex I/P® Digital Drive with Cloud-Enabled MasterflexLive™, Open-Head Sensor, and Cytoflow® Pump Head for Precision Tubing, Stainless Steel Housing, Cole-Parmer (CAT#: STEM-DS-0117-LC)