Lindberg/ Blue M GO01390A-1 Gravity Oven, Thermo Fisher Scientific (CAT#: STEM-GLE-2287-LGZ)

The manufacturer of Lindberg/ Blue M GO01390A-1 Gravity Oven is Thermo Fisher Scientific. Model is GO01390A-1. The temperature control accuracy is ±0.3% of the set point, and the temperature range is up to 260°C.

Condition: used
Temperature Range: +40 °C to +260 °C
Temperature Uniformity: ±3% at 100 °C. Actual performance may vary depending on load,chamber size,sample placement,ambient temperature and environmental conditions.
Controller: Microprocessor automatically optimizes control parameters during operation. Digital, single setpoint with simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in °C and °F.
Control Accuracy: ± 0.5% typical.
High Limit Overtemp: Adjustable high temperature limit protection.
Heating Elements: Long-life,low-watt density elements, enclosed and protected.
Interior Construction: Corrosion resistant 304 brushed stainless steel.
Exterior Construction: Triple-wall,heavy gauge steel with scratch-resistant finish,or stainless steel (see chart);door latch (adjustable) and rugged hinges.
Insulation: Fiberglass,minimum 3" on all sides.Peripheral silicon door gasket to minimize heat loss.
Ports and Vents: Adjustable intake bottom right side;exhaust top right side,1.0" (25.4 mm) diameter.
Air Exchange: Intake port allows fresh air entry to establish gravity airflow pattern.
Shelves: Two (2) open wire shelves,adjustable. All models include 16 shelf positions at 0.875" increments.Stainless steel exterior models have stainless steel shelves;others are nickel plated.Stainless steel (S models only).
Electrical: 120 V, 50/60 Hz
Interior Dimensions(W X F-B X H in" (mm)): 19" (480) x 15" (380) x 18" (450)
Exterior Dimensions(W X F-B X H in" (mm)): 29" (730) x 22" (560) x 31" (780)

1. With digital control instrument and separate LED indicator, temperature control is accurate and reliable.
2. 3" thick fiberglass insulated walls and silicone door gaskets help prevent heat loss.
3. The over-temperature protection device is independent. When the temperature is exceeded, the heating element will fail, and sound and light warnings will be issued to protect the working process and load.
4. Enamelled steel or stainless steel housing is optional.

BMT Ecocell 222 ECO Gravity Oven, MMM Group(CAT#-STEM-GLE-1219-LGZ)
BMT Ecocell 404 Gravity Oven, MMM Group(CAT#-STEM-GLE-1220-LGZ)
BMT Ecocell 404 ECO Gravity Oven, MMM Group(CAT#-STEM-GLE-1221-LGZ)
BMT Ecocell 55 Gravity Oven, MMM Group(CAT#-STEM-GLE-1222-LGZ)
BMT Ecocell 55 ECO Gravity Oven, MMM Group(CAT#-STEM-GLE-1223-LGZ)
BMT Ecocell 707 Gravity Oven, MMM Group(CAT#-STEM-GLE-1224-LGZ)