Lifemeta Sampling Base, NFM5D, 6 Bar (CAT#: STEM-BC-0081-ZJF)

The Lifemeta sampling base is designed for use with compatible sampling needles. It provides an interface between a stainless steel vessel and the disposable sampling needle assembly. Two sampling base types are available to match different needle series. The sampling base and sampling needle are preassembled before installation. After installation, the base interface can be connected to a stainless steel container for steam-in-place preparation. Aseptic sampling can then be performed after sterilization. The design helps reduce contamination risk during liquid sampling. It is suitable for ordinary liquids and cell culture liquids, including high-viscosity sampling applications.

TC base material: 316L stainless steel
Main body material: 6061 aluminum alloy
Wrench material: 316L stainless steel
Surface treatment: Electropolished liquid-contact parts
Surface roughness: Ra≤0.5 μm
Temperature range: -80 to 150°C or -112 to 302°F
Pressure range: 0 to 6 bar or 0 to 87 psi
Port configuration: 5 ports
TC connection: 1.5 inch TC with OD 50.5 mm
Compatible needle type: NF 1 mm, NF 2 mm, or NS 2 mm
Packaging: 1 base per pack or 50 plugs per pack

Designed for use with disposable sampling needles
Supports high-viscosity cell culture sampling
Enables precise small-volume sampling
Simple assembly structure
Supports steam-in-place preparation
Helps reduce contamination risk
Compatible with NF and NS needle series
Available with sampling plugs

STEM-BC-0079-ZJF
STEM-BC-0080-ZJF