Life Technologies iBlot 2 Dry Blot System, Thermo Fisher Scientific (CAT#: STEM-BE-2039-LGZ)

The manufacturer of Life Technologies iBlot 2 Dry Blot System is Thermo Fisher Scientific. Model is iBlot 2. The iBlot 2 Gel Transfer Device is an integral part of the iBlot 2 Dry Blotting System, which includes a transfer device and consumable transfer stack containing the required buffers and transfer membrane (nitrocellulose or PVDF). Buffered ion reservoirs are incorporated into the gel matrix (transfer stack) rather than buffer tanks or soaked paper. The high density of ions in the gel matrix enables rapid transfer of proteins. During blotting, the copper anode does not generate oxygen as a result of water electrolysis, reducing blotting distortion (conventional protein transfer techniques, including wet, semi-wet and semi-dry, use inert electrodes to generate oxygen). The distance between electrodes is shortened, the electric field strength is high, the current is large, and the transmission time is shortened. Trapped air bubbles, often in sandwich layers of hand-prepared blots, are easily avoided due to the defoaming design that promotes uniform and complete transfer. For protein expression, isolation and analysis, Western Blotting.

Condition: used
Model: iBlot 2

1. Complete protein transfer in 7 minutes or less.
2. The detection sensitivity is high and the transfer is uniform.
3. The reliability and reproducibility of the blots are increased.
4. Flexible gel size formats and membrane types.
5. A simple, user-friendly system.
6. Option to create a new custom program.
7. Built-in tutorials and application notes.
8. The transport stack is higher quality and more compact than before.
9. Fast, high-quality protein transfer.
10. For dry electrophoresis of proteins from mini-, midi- and E-PAGE™ gels, perform Western detection on nitrocellulose or PVDF membranes.
11. Provide high-quality transmission, convenience, and speed, produce crisp, clear bands that remain sharp and straight, and transmission efficiency is quite remarkable.
12. User-created custom programs are allowed.
13. With the iBlot 2 system, there is no need to prepare buffers, pretreat gels, or clean up after blotting.
14. Compared to traditional Western transfer techniques, the total preparation and run time per blot is typically less than 10 minutes, a substantial time saving.

Fisher Scientific Owl VEP-2 Dry Blot System, Thermo Fisher Scientific(CAT#-STEM-BE-0951-LGZ)
Bio-Rad Trans-Blot SD Semi-Dry Transfer Cell, Bio-Rad(CAT#-STEM-E-0954-LGZ)
Bio-Rad Trans-Blot Turbo Semi-Dry Transfer Cell, Bio-Rad(CAT#-STEM-BE-0955-LGZ)