LC-HPR-B250 Magnetic Stirring High-Pressure Reactor, 250 mL and 300°C (CAT#: STEM-BC-3667-ZJF)

The LC-HPR-B250 is a medium-volume magnetic stirring reactor for pressurized chemical synthesis. Its 250 mL vessel operates with an internal magnetic stirrer and a brushless DC drive. The static and graphite seal configuration eliminates the need for a dynamic shaft seal. This arrangement reduces leakage risk when handling flammable, explosive, toxic, or valuable substances. The 304 stainless-steel reactor provides corrosion resistance and high-temperature strength. The modular heater supplies up to 0.7 kW of heating power. Stirring speed and temperature are shown on the LCD for direct process monitoring. The detachable vessel design enables convenient handling and accelerated cooling after the reaction.

Capacity: 250 mL
Structural material: 304 stainless steel
Design temperature: 300°C
Heating and cooling rate: ≤5°C/min
Working pressure: ≤20 MPa
Stirring speed: 0-1800 rpm
Heating power: 0.7 kW
Heating method: Modular electric heating
Stirring method: Internal magnetic stirring
Valves: Two standard valves, one gas inlet and one gas outlet
Explosion-protection device: Optional according to pressure requirements
Pressure gauge: Selected according to rupture-disc pressure
Temperature-measurement port: 4 mm standard
Net weight: 16.5 kg
Product dimensions: 330 × 330 × 525 mm

Two-hundred-fifty-milliliter vessel
Three-hundred-degree design temperature
Twenty-megapascal pressure rating
Fully sealed magnetic stirring
High-temperature stainless steel
LCD process monitoring
Dual gas valves
Rapid detachable-vessel cooling

STEM-BC-3465-ZJF
STEM-BC-3466-ZJF
STEM-BC-3467-ZJF
STEM-BC-3468-ZJF
STEM-BC-3469-ZJF