Labconco 6910100 PCR Enclosure, Labconco (CAT#: STEM-PE-2029-LGZ)

The manufacturer of Labconco 6910100 PCR Enclosure is Labconco. Model is 6910100. The self-contained enclosure does not require a separate ductwork to filter the air. An LCD message center on top of the chassis continuously reports filter status.

Condition: used
Power Requirements: 115 V, 60 Hz, 3 A
Weight: 290 lbs

1. Its structure is glacier white, dry powder epoxy coated aluminum.
2. 3/16 thick tempered safety glass edge.
3. Air mix, epoxy coated steel backsplash.
4. Two roughing pre-filters.
5. Two 1.5 diameter utility ports with plastic plugs.
6. Gas-assisted filter clamping mechanism.
7. Control panel with LCD to display filter elapsed time; timer is programmable for sound and light alarm; alarm/silent switch with LED indicator; set filter time, up/down, and into programming switches; and event timers.
8. Built-in, non-sparking motor/blower.
9. Pre-wire two 20 watt fluorescent lamps and switch fans and lighting.
10. Angled ¼ thick tempered safety glass trim, adjustable to two operating height positions (13" and 15" to work surface), swivels to full open position (24.25") for cleaning and transferring materials.
11. The surface speed is 100 fpm (236 CFM) when the sash opening is 13 inches to the work surface, and the surface speed is 80 fpm (236 CFM) when the sash opening is 15 inches.
12. Test port air sampling syringe.
13. Shipped fully assembled.

TopAir Systems PCR-120-HEPA PCR Cabinet, TopAir Systems(CAT#-STEM-PE-0478-LGZ)
TopAir Systems PCR-120-UV PCR Cabinet, TopAir Systems(CAT#-STEM-PE-0479-LGZ)
Erlab Captair Bio 321 PCR Workstation, Erlab(CAT#-STEM-PE-1175-LGZ)
Erlab Captair Bio 391 PCR Workstation, Erlab(CAT#-STEM-PE-1176-LGZ)
Plas-Labs 825-UVC PCR Chamber, Plas Labs(CAT#-STEM-PE-1771-LGZ)
AirClean Systems AirClean 600 - AC632DB PCR Table, AirClean Systems(CAT#-STEM-PE-1776-LGZ)