ITT Jabsco LH320C-NVSW Sanitary Wash-down Rotary Lobe Pump, 13 GPM, 230 VAC, Three-Phase, Cole-Parmer (CAT#: STEM-DS-1546-LC)

The Sanitary Wash-down Rotary Lobe Pump manufactured by Cole-Parmer complies with EHEDG (European Hygienic Equipment Design Group) and CIP/SIP standards. The noncontacting rotors prevents particles from falling into the fluid flow.

Max Flow Rate (GPM):13
Max Flow Rate (LPM):49.2
Max Motor RPM (rpm):1750
Motor Type:WSDN
Power (VAC):230
Power (amps):2.8
Power (Phase):3
Wetted Materials:316 Stainless Steel, Carbon, Nitrile
Inlet Connection:3/4" Tri-Clamp®
Outlet Connection:3/4" Tri-Clamp®
Run Dry:No
Max Temperature (° F):284
Max Temperature (° C):140
Viscosity, Max (cP):10000
Duty Cycle Continuous:Yes
Length (in):23
Height (in):16
Width (in):11
Length (cm):58.42
Height (cm):40.64
Width (cm):27.943
A Sanitary Regulatory Approval:Yes
Motor hp:1

The front-mounted shaft seals can be fully accessed from the front of the pump, make it easily to be replaced without affecting the piping.
The dual-wing rotors don't require timing adjustments and offer a high volumetric efficiency.
The rugged design combines heavy-duty shafts to provide high-pressure capacity.

Eccentric Screw Container Pumps JP-700.80, Stainless Steel 316Ti, Jessberger (CAT#: STEM-DS-0210-LSY)
Horizontal Eccentric Screw Pumps JP-700 H/-HL, Flow Rates Up To 3.000 l/h, Jessberger (CAT#: STEM-DS-0211-LSY)
Dosing Pumps For Fluid To Viscous Media JP-7032-7120.2, Flow Rates 0.6-1200 l/h, Jessberger (CAT#: STEM-DS-0212-LSY)