Instek GOS305 In Lake Mary, FL, USA, GW Instek oscilloscopes (CAT#: STEM-AIPO-0673-YJL)

Instek GOS305 In Lake Mary, FL, USA, model GOS305 is manufactured by GW Instek oscilloscopes.
The Instek GOS-305 oscilloscope is a graph-displaying device - it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

Condition: Used
CRT
Type: 75mm round screen; 8 x 10 DIV (1 DIV = 6mm)
Blanking: G1
Vertical System
Sensitivity: 10mV/DIV
Bandwidth: DC ~ 5MHz
Attenuator: 1/1, 1/10, 1/100 and GND
Input Impedance: 1MW ±5%
Maximum Input Voltage: 600Vpp or 300Vpk (DC + AC peak), at 1kHz or less
Horizontal System
Sensitivity: 250mV/DIV or better
Bandwidth: DC ~ 5MHz
Input Impedance: 100kW ±10%
Time Base
Sweep Frequency: 10Hz ~ 100kHz in 4 ranges with fine control
Synchronising: Internal and external
Synchronisation
Sensitivity: INT more than 1 DIV, EXT more than 2Vpp
Other Details
Power Source: AC 110V/220V/240V ±10%, 50/60Hz
Accessories: Power cord x 1, Instruction manual x 1, Test lead (GTL-103) x 1
Dimensions: 129mm (w) x 191mm (h) x 278mm (d)
Weight: 3.8kg approx

5MHz Bandwidth
Single Channel
10mV Sensitivity
Easy to Operate
Low Cost, High Performance

Instek GOS658G In Lake Mary, FL, USA (CAT#: STEM-AIPO-0674-YJL)
Instek GOS620FG In Lake Mary, FL, USA (CAT#: STEM-AIPO-0675-YJL)
Instek GOS6200 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0676-YJL)
Instek GRS6052A In Lake Mary, FL, USA (CAT#: STEM-AIPO-0677-YJL)
Instek GOS6112 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0678-YJL)
Instek GOS653G In Lake Mary, FL, USA (CAT#: STEM-AIPO-0679-YJL)