Infant Incubator BK-IN 1 Pro, Biobase (CAT#: STEM-RAFAE-0002-LKN)

Biobase Infant Incubator BK-IN 1 Pro provides newborns with a temperature and humidity adjustable environment similar to that of the mother's womb, which does not apply to the transfer of the baby.

Specification of Hood
Hood Size (W*D*H)mm: 865*455*490
Mattress Size(W*D)mm: 770*380
Thermostat Cover: Double-layer
Access Port: 6(2 Iris Ports)
Operating Window: 4
Infusion Seal: 8

Technical Parameters
Power Supply: AC110/220V±10%, 50/60Hz
Consumption: 1320W
Heater Consumption: Heating chamber: 290W; Water box: 170W
Display: LCD
Control Model: Air, Skin, Humidity, Oxygen concentration
Heating Indicator: 0~100%, 10% increments
Air Temp. Control Range(°C): 25.0~37.0; 37.0~38.0
Skin Temp. Control Range(°C): 34.0~37.0; 37.0~38.0
Skin Sensor Temp. Display Range(°C): 5.0~65.0
Skin Sensor Temp. Accuracy(°C): ±0.3
Temp. Rise Time(Ambient Temp. 22°C±2°C): ≤50 min
Temp. Fluctuation(°C): ≤0.5
Mattress(Horizontal)Temp. Uniformity(°C): ≤0.8
Mattress(Tilted)Temp. Uniformity(°C): ≤1.0
The Difference between the Average Air Temp. and the Set Temp.(°C): ≤1.5
Water Box Capacity(ml): 1200
Relative Humidity Display Range: 0%~99% RH
Relative Humidity Control Range: CAH%RH~90%RH
Humidity Display Accuracy: ±10%
Oxygen Concentration Display Range: 0%~99%
Oxygen Concentration Display Accuracy: ±5%
Oxygen Sensor Lifetime: 10000 hours under 100% oxygen concentration
Noise Level of Inside Incubator: ≤55dB[A]
Infant Bed Tilt Angle: ±10%

Operating Condition
Working Temp. Range(°C): 20~30
Transport and Storage Temp. Range(°C): -20~55
Working Relative Humidity: 30%~75% RH
Transport and Storage Relative Humidity: ≤93%RH
Ambient Air Flow Rate: <0.3m/s
Working Atmospheric Pressure: 800hPa~1060 hPa
Transport and Storage Atmospheric Pressure: 500 hPa~1060 hPa
Application Environment Elevation: ≤2000m
Overvoltage Category: Ⅱ
Pollution Grade: 2
General Alarm: Power Failure, Fan Failure, Temp.Deviation, Sensor failure,Over Temperature,Water Shortage, etc
System Alarm: Communication Deviation, Temp. and Humidity Deviation
Standard Accessory: RS232 interface connector, X ray cassette, IV pole, tray, drawer*3.
External Size(W*D*H)mm: 1050*675*1400~1600
Net Weight: 117kg
Gross Weight: 127kg

1.Microprocessor based servo control mode: air temperature, skin temperature, humidity, oxygen concentration.
2.LCD display: set temperature, skin temperature, humidity, oxygen concentration, heat power rate.
3.Double-layer thermostat cover; 4 operating windows and 2 iris ports.
4.Self-testing function; 22 kinds of audible and visual alarms.
5.>37°C preset mode.
6.Independent locking device for front door.
7.The inclination of infant bed is adjustable.

Infant Incubator BJPX-3101, Biobase (CAT#: STEM-RAFAE-0001-LKN)