Ictalurid Herpesvirus 1 Dye-Based qPCR Kit, 50 Tests/Box (CAT#: STEM-SLSR-1007-ZJF)

Utilizing SYBR Green real-time PCR technology, this detection kit enables the amplification and quantification of Ictalurid Herpesvirus 1 with high efficiency. Specific primers are designed to bind to conserved gene regions of the target. As PCR progresses, fluorescence is generated and captured by the system in real time, providing clear and reliable interpretation of the presence and quantity of Ictalurid Herpesvirus 1 in test samples.

Kit Components:
Ictalurid Herpesvirus 1 Amplification Mix: 50 µL × 1 tube
Ictalurid Herpesvirus 1 Reaction Mix: 950 µL × 1 tube
Ictalurid Herpesvirus 1 Positive Control: 50 µL × 1 tube
Ictalurid Herpesvirus 1 Negative Control: 50 µL × 1 tube
Instruction Manual: 1 copy
Note 1: Components from different lot numbers must not be used interchangeably.
Note 2: The kit components are sufficient for the number of tests specified on the label.
Storage Conditions and Shelf Life:
-20°C ± 5°C, protect from light; avoid repeated freeze-thaw cycles (less than 7 times); shelf life is 12 months.
Applicable Instruments:
1.5 mL DNase/RNase-free centrifuge tubes
0.2 mL PCR reaction tubes
Filter tips (specifications: 10 µL, 200 µL, 1000 µL)
Centrifuge, vortex mixer, micropipettes of various specifications
Agarose, electrophoresis tank, power supply, gel imaging system
Sample Requirements:
Acceptable sample types include food, feces, vomit, oral samples, saliva, nasal/throat/eye/anal swabs, and virus cultures.
Cross-contamination should be avoided. Samples should be tested immediately after collection or stored at -20°C ± 5°C. For long-term storage, keep below -70°C.
Sample Storage and Transport:
Samples can be stored short-term at -20°C.
For long-term storage, keep below -70°C (no longer than 6 months).
During transportation, use 2-8°C ice packs. Repeated freeze-thawing is strictly prohibited.

No setup required—add DNA and begin.
Superior specificity derived from conserved sequence primer design.
Designed for heightened assay sensitivity.
Positive control ensures detection integrity.
One-tube closed system improves contamination control.
Use limited to non-clinical research.

STEM-SLSR-1005-ZJF
STEM-SLSR-1006-ZJF
STEM-SLSR-1008-ZJF
STEM-SLSR-1009-ZJF