HX-20TLS Intelligent Constant Temperature Mixer, -10~100°C, Shanghai Huxi Industrial CompanyLimited (CAT#: STEM-GLE-3427-LGZ)

HX-20TLS adopts DC brushless motor and microcomputer control technology, which perfectly combines the two functions of PI heating constant temperature technology and oscillation, which greatly shortens the time of experimental operation and improves the efficiency of staff.

Temperature setting range: -10~100°C
Temperature control range: 0~100°C (room temperature 16°C, no-load can actually reach room temperature -16°C)
Display mode: 4.3-inch high-definition capacitive screen
Control method: full screen TFT touch
End or fault alarm prompt function: Yes
Temperature calibration function: yes
Temperature or time dynamic display function: Yes
Motor oscillation jog function: yes
Computer or host computer control: optional USB interface
Power input: 100-240V/50-60HZ~1.0A
Time setting: 0~99h59min (setting the time to 0 means continuous work)
Motor oscillation speed: 200-1800rpm
Oscillation Amplitude: 3mm
Oscillation mode: horizontal rotation
Temperature control accuracy: ≤±0.5°C
Display accuracy: 0.1°C
Module temperature uniformity: ≤±0.3°C
Heating time: ≤15 minutes (20°C to 100°C)
Cooling function: ≤15 minutes (100°C to 20°C)
Multi-point combination programming function: Yes (up to 5 groups optional)
Standard centrifuge tube module: 35*2.0ml
Optional centrifuge tube modules: A,B,C,D,E,F,G,H,J,K,L,M,N

1. The operation is simple and convenient, the large display screen makes the data clear at a glance, and both real-time and setting parameters are displayed.
2. All icons are displayed dynamically, which is more humanized.
3. The powerful programmable function implements multi-point temperature control, up to 5 temperature points and constant temperature automatic fault detection and buzzer alarm function.
4. Temperature deviation calibration function and short oscillation jog function.
5. The transparent thermal insulation cover is made of high temperature resistant PC environmental protection material, integrated design to prevent loss, multiple safety protection functions, in line with CE safety standards, safe and reliable.
6. The built-in over-temperature protection device has a power-off recovery function. After the power-off recovery, the instrument can automatically resume operation according to the original set program.
7. Microprocessor control, good temperature control linearity, accurate oscillation speed and small fluctuation.
8. Equipped with a timing function, the cultivation time can be set arbitrarily within the range of 0~100 hours, and the continuous running time can also be set, and the USB or host computer communication function can be selected.

HX-20 Thermostatic Metal Bath, RT+5°C~100°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-3418-LGZ)
HX-20L Thermostatic Metal Bath, -10°C~100°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-3419-LGZ)
HX-20G High Temperature And Constant Temperature Metal Bath, RT+5°C~100°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-3420-LGZ)
HX-20G2 High Temperature And Constant Temperature Metal Bath, RT+5°C~100°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-3421-LGZ)
HX-20S Intelligent Thermostatic Metal Bath, -10~100°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-3422-LGZ)
HX-20LS Intelligent Thermostatic Metal Bath, -10~100°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-3423-LGZ)