HPT-8 Quantitative Nitrogen Concentrator, 8 Samples (CAT#: STEM-AL-0714-ZJF)

The HPT-8 is an automatic quantitative nitrogen concentrator for parallel sample concentration. It uses nitrogen flow and water bath heating to accelerate solvent evaporation. The system supports timed, quantitative, and steam-dry operating modes. Up to eight samples can be concentrated at the same time. The double-blowing needle design supports switching between oblique and direct blowing modes. Independent channel control allows different samples to be managed separately. The 7-inch touch screen displays temperature, pressure, and timing parameters. A built-in exhaust system helps guide exhaust gas discharge during operation.

Model: HPT-8
Item No.: 1007010001
Operating Modes: Timed, quantitative, and steam-dry modes
Sample Capacity: 1-8 samples
Sample Volume: <=200 mL with 0.5 mL and 1.0 mL quantitative scale
Water Bath Volume: 8.0 L
Control Mode: 7-inch LCD touch screen
Pressure Adjustment: 0-0.4 MPa
Temperature Control Range: RT-90 C
Temperature Control Accuracy: +/-0.5 C
Heating Mode: Water bath heating
External Nitrogen Supply Pressure: <=80 psi
Power: 600 W
Working Voltage: 220 VAC +/-10%, 50 Hz
Exterior Dimensions: 540 x 440 x 410 mm
Packing Dimensions: 650 x 700 x 600 mm
Net/Gross Weight: 36/39 kg

Eight-channel concentration
Quantitative stop function
Double-blowing needle design
Independent pressure control
7-inch touch-screen interface
Removable nozzles
Built-in exhaust system
Overheat protection