HM-64S Tissuelyser Noise Reduction Model, 64 Samples (CAT#: STEM-AL-0399-ZJF)

The HM-64S is a noise-reduction tissuelyser for high-throughput tissue grinding. It uses vertical reciprocating vibration with grinding beads for impact, shear, and homogenization. The system can process 64 samples in a short grinding cycle. Closed sample tubes help prevent cross-contamination during sample crushing. The touch-screen operation interface allows grinding time and frequency settings to be configured. The full metal body and working chamber safety lock support stable and safe operation. Adapter pre-cooling with liquid nitrogen can be used when low-temperature grinding is required. The low-noise design keeps operation below 55 dB for routine laboratory use.

Model: HM-64S
Item Number: 1019039001
Sample Process: Simultaneous processing of 64 samples in 15 s
Sample Volume: Standard 2 mL x 64 PE adapter
Optional 2 mL x 24, 5 mL x 12, 10 mL x 4, 25 mL x 4, and 50 mL x 2 grinding jar
Feed Size: According to adapter
Discharge Size: ~5 um
Display Mode: Touch screen
Number Of Grinding Platforms:>2
Grinding Frequency: 0-70 Hz
Grinding Time: 0 s-99 min
Grinding Ball Diameter: 0.1-30 mm
Grinding Ball Material: Alloy steel, chrome steel, zirconium oxide, tungsten carbide, quartz sand, etc.
Acceleration: Higher speed reached in 2 s
Noise Level: <55 dB
Grinding Method: Wet, dry, and low-temperature vertical ball grinding
Instrument Size: 340 x 380 x 600 mm
Weight: 35 kg

Noise-reduction tissuelyser design
Vertical ball grinding action
Closed tube sample processing
Touch-screen parameter setting
Liquid nitrogen adapter pre-cooling support
Full metal body with safety lock
Less than 55 dB noise level
Suitable for wet, dry, and low-temperature grinding