High-precision Solid And Liquid Densimeter BK-DMH120D (CAT#: STEM-OEM-0222-ZJF)

This instrument features automatic zero tracking, buzzer alerts, and overload warnings to ensure safe and accurate operation. It is equipped with a solution compensation function, allowing for precise measurements even when using liquids other than water as the testing medium. Additionally, the device includes real-time water temperature compensation to improve reliability, and an RS-232C interface for seamless data communication with external systems.

Capacity: 0.001-120g
Density Resolution: 0.0001 g/cm³
Density Range: 0.0001-99.9999 g/cm³
Measuring Time: About 5s
Solid Mode
Measuring Principle: Archimedes principle
Measurable Items:
- Density of general non-absorbency solids
- Density and porosity of porous materials
- Oil content of oil-bearing materials
- DIN abrasion loss of rubber
- Powder density
- Water absorption rate
Specific Gravity Measuring Frame: Unibody injection-molded, size 135×50×116mm (L×W×H)
Measuring Tank: Unibody injection-molded transparent tank, size 169×98×83mm (L×W×H)
Mixed Material Percentage
Function: Automatically reads percentage of main material in a two-material composite
Setting: Freely set the density values of main and subordinate materials
Display: Density value, percentage of main material
Liquid Mode
Measuring Principle: Archimedes displacement method
Weight Value Data Storage: 3 groups
Specific Gravity Measuring Frame: Stainless steel
Result Display: Density and Baume value
Testing Method: Distilled water testing
Calibration Mode: Auto correction, auto detection
Standard Accessories:
- Common: Tweezer, thermometer, 100g weight, windshield, power transformer
- Solid: Tank, testing board, particle measuring assembly (1 set), floating body measuring assembly (1 set)
- Liquid: Measuring plate, measuring frame, DE-20A standard liquid measuring assembly
Optional Accessories: DE-40 printer, DE-20B anti-corrosive liquid measuring assembly
Power Supply: AC110/220V±10%, 50/60Hz
Package Size (W×D×H): 450×200×360mm
Gross Weight: 6.5kg

Suitable for quality management, cost control, new formula development, and material research.
Capable of measuring solid samples in any form.
Optional DE-20B anti-corrosive liquid measuring assembly required for testing volatile, corrosive, strongly acidic, or strongly alkaline liquids.

STEM-OEM-0220-ZJF
STEM-OEM-0221-ZJF
STEM-OEM-0223-ZJF
STEM-OEM-0224-ZJF