H-DMF Disc Filter, H-DMF, 0.6 MPa (CAT#: STEM-BC-0067-ZJF)

The H-DMF disc filter is a pressure filtration unit for laboratory and small-volume process applications. It is designed for routine solution clarification, degassing, and cold sterilization. The housing has a fully detachable structure to support cleaning and maintenance. The polished internal surface is intended for hygienic use. The filter can be configured with single-layer or double-layer membrane filtration. Its sealed structure supports stable filtration under pressure. The unit is suitable for benchmark testing and low-flow filtration tasks. Stainless steel material options support use in controlled laboratory and process environments.

Polishing type: Mirror polishing with optional internal electropolishing
Polishing accuracy: Inner wall 0.38 μm and outer wall 0.4 μm
Housing material: 304 or 316L stainless steel
Vent and liquid valve material: 304 or 316L stainless steel
Clamp material: 304 stainless steel
Support leg material: 304 stainless steel
Seal and gasket material: Silicone, EPDM, or fluororubber
Body connection: Through-bolt connection
Inlet and outlet: Sanitary clamp connection
Vent valve bore: 4 mm for 8 mm tubing
Maximum operating pressure: 0.6 MPa or 6 bar
Operating temperature: 90°C with design temperature 140°C
Sterilization: 121°C for 30 minutes
Membrane diameter options: 47 mm, 90 mm, 142 mm, 200 mm, 293 mm

Fully detachable construction for cleaning
Hygienic polished internal and external surfaces
Optional electropolished surface treatment
Supports single-layer membrane filtration
Supports double-layer membrane filtration for 47 mm configuration
Sealed structure for pressure filtration
Multiple membrane diameter configurations
Suitable for laboratory and small-flow filtration

STEM-BC-0039-ZJF
STEM-BC-0040-ZJF
STEM-BC-0065-ZJF
STEM-BC-0066-ZJF
STEM-BC-0070-ZJF