GUF Wound Depth Filter Cartridge, PP, 5 μm (CAT#: STEM-BC-0163-ZJF)

The GUF wound depth filter cartridge is made from multi-layer gradient precision PP membrane. It provides higher and more stable retention efficiency than conventional melt-blown cartridges. The gradient filtration structure increases dirt-holding capacity and extends service life. An internal PP core improves pressure resistance and prevents deformation. The filter contains no adhesive, reducing extractables. Raw materials meet NSF requirements. It is suitable for RO security filtration, drinking water filtration, cooling water filtration, and electroplating solution filtration. Compared with ordinary melt-blown filters, it provides higher filtration efficiency and longer service life.

Model: GUF
Filter media: PP
Core/interface: PP
Outer diameter: 64 mm or 68 mm
Inner diameter: 30 mm
Maximum operating temperature: 80°C
Maximum differential pressure: 0.3 MPa at 21°C and 0.21 MPa at 80°C
Recommended flow: 0.5 m³/h per 10 inch
Filtration precision: 0.5 to 20 μm
Length options: 5, 10, 20, 30, 40 inch
Interface options: Flat end without gasket, flat end with PE gasket, 222 flat, 222 fin, 226 fin, 226 flat
Seal options: Silicone, EPDM, FKM, FEP

Multi-layer gradient PP winding
Higher retention than melt-blown cartridges
Larger dirt-holding space
Longer service life
Internal PP core resists deformation
Adhesive-free construction
Low extractables
Cost-effective security filtration

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF