GeneChip Scanner 3000 7G, Affymetrix (CAT#: STEM-CTEPO-0095-ZJF)

The manufacturer of the GeneChip Scanner 3000 7G, Affymetrix is Affymetrix.
Refurbished Affymetrix GeneChip Scanner 3000 (7G platform) complete with hybridization oven 640, fluidics station 450, workstation and GeneChip® Operating Software (GCOS).
The GeneChip Scanner 3000 7G is an extension of the GeneChip Scanner 3000 (GCS 3000) series that allows you to scan next-generation higher-density arrays, including SNP arrays with up to 900,000 SNPs, tiling arrays for transcription and all-exon arrays for whole-genome analysis.

Condition: Refurbished, Certified Pre-owned
Scan time: 5–45 minutes per cartridge, depending on array type
Sensitivity: <0.5 chromophore equivalents/μm2 (CPSM) at a signal-to-noise ratio of 2: 1 at wavelengths appropriate to R-Phycoerythrin
Excitation: 532 nm, 10 mW maximum
Emission filters : 570 nm, Long-Pass; 565 nm, 605 nm, 655 nm and 705 nm, Long-Pass; 20 nm wide band-pass filters
Detector: Meshless Photomultiplier Tube, Red Enhanced
Displayed/Saved dynamic range: 16-bit, (65,535: 1)
Software: GeneChip® Command Console® Software (AGCC) v4.1.2 or higher
Dimensions: 13”W x 22”D x 23”H (33 cm x 56 cm x 58 cm). Additional 8” (20 cm) in height clearance required for AutoLoader, if present. (31”/79 cm total).
Weight: ~70 lbs (31.8 kg), ~105 lbs (47.6 kg) with AutoLoader
Power: Voltage: 100–240 V, Current: 4–2 A, Frequency: 50-60 Hz
Optional: VWR digital heat blocks (p/n 13259-050).

Designed for future system evolution.
Compact size for better space utilization.
Higher resolution scanning at pixelations from 2.5 μm down to 0.51 μm, automatically determined by array type.
Optimal image uniformity and collection efficiency across entire scan area with patented Flying Objective technology.
Auto-Set laser power eliminates effects due to laser drift and reduces scannerto- scanner variability.
Automatic arc correction scanner firmware dynamically checks and adjusts for changes in residual arc correction and x-linearity.
QC Toolbox Software Kit now incorporated as a standard feature, QC Toolbox provides a tool to verify scanner performance for internal QA requirements as well as the ability to recalibrate the scanner if needed.
AutoLoader-compatible for walk-away automation.

Fisher 7-910 Colony Counter, Fisher Scientific
GS-800 Calibrated Densitometer, Bio-Rad
Hamilton Starplus Multi Channel Automated ELISA Liquid Handler, Hamilton