G1159A Valve, Agilent Technologies (CAT#: STEM-CPO-0489-ZJF)

The manufacturer of the G1159A Valve, Agilent Technologies is Agilent Technologies.
Refurbished Agilent 1100/1200 Series 6-position selection valve G1159A.

Condition: Refurbished, Certified Pre-owned
Liquid contacts : Stainless steel and PEEK
Port size: Accepts 10-32 male threaded fittings
Flow passage diameters : Stator 0.6-mm (0.024”), stator face assembly and rotor seal 0.4-mm (0.015 inch.)
Volume in flow passage :
Angled ports 1, 2, 5 (15.6 μl)
Radial ports 2, 4, 6 (18,8 μl)
Maximum pressure : 35 MPa (345 bar, 5000 psi)
Recommended flow range : 0.3 - 40 ml/min
Weight: 1.9 Kg (4.2 lbs)
Dimensions (height x width x depth) : 92 x 84 x 200 mm (9.2 x 3.3 x 8.0 inches)
Power supply : 24 Volts DC (1.7 amps)
Ambient operating temperature : 4 to 55°C (39 to 131°F)
Humidity: < 95%, non-condensing
Safety Standards :
IEC, CSA, UL, EN
Installation category II, pollution degree 2.
For indoor use only
Agilent 1200 Firmware : A.05.04 and higher
Control Module Firmware G1323B: B.03.11 and higher
Agilent ChemStation Software: A.09.03 and higher
Optional: Agilent sample transfer stand (p/n 5042-6423), Agilent rail holder (p/n 5067-1510), ferrules and screws.

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

FRC-10A Fraction Collector, Shimadzu
G1160A Valve, Agilent Technologies
G1303A On-Line Vacuum Degasser, Agilent Technologies/HP