Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

FTB-720G Optical, Ethernet and Multiservice Tester, Exfo (CAT#: STEM-AIAEPO-0804-ZJF)

Highlights

In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Cat Number: STEM-AIAEPO-0804-ZJF

Application: To characterize, troubleshoot and maintain optical telecommunication networks

Model: FTB-720G

Add to Cart



Description

The manufacturer of the FTB-720G Optical, Ethernet and Multiservice Testeris Exfo.
An all-in-ONE Ethernet/optical solution for field technicians installing, testing and troubleshooting FTTx, fronthaul, backhaul, small cell, DAS, remote radio head and data center networks, in addition to OTN, SONET/SDH, Fibre Channel, GigE and 10 GigE, CPRI/OBSAI and SyncE/1588 PTP services, with the added support of OTDR and iOLM capabilities.
The product is located in Lake Mary, FL, USA.

Specification

Condition: Certified Pre-owned
Size (H x W x D): 130 mm x 252 mm x 56 mm (5 1⁄8 in x 9 15⁄16 in x 2 3⁄16 in) (module only)
Weight (without battery): 1.0 kg (2.2 lb)
Temperature:
Operating: 0 °C to 50 °C (32 °F to 122 °F)
Storage: –40 °C to 70 °C (–40 °F to 158 °F)
Relative humidity: 0 % to 93 %, noncondensing
Battery life (extended):
OTDR = More than 6h taking 12 traces single per hour
1G = More than 4h
10G = More than 3h
Battery charging time: Two hours from full discharge to full charge
Languages: English, Chinese, Japanese and Korean
OPTICAL:
Dynamic range up to either 36 or 39 dB
Test through high-port-count splitters (up to 1x128)
Combined singlemode/multimode wavelengths
Event dead zone as low as 0.8 meters
iOLM-ready: one-touch multiple acquisitions, with clear go/no-go results presented in a straightforward visual format
Integrated tool combines a visual fault locator, inspection probe, broadband power meter and a CW source mode
MULTISERVICE:
SONET/SDH, OTN and Ethernet interfaces up to 11.3 Gbit/s
Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP)
FTTA RRH validation using BBU/eNodeB emulation of the layer-2 CPRI protocol; covering interface rates from 1.2 Gbit/s to 9.8 Gbit/s, including unframed BER testing; testing can be carried out at the bottom of the basestation, or kilometers away with a C-RAN architecture
Effi ciently assess Fibre Channel networks with best-in-class coverage via 1x, 2x, 4x, 8x and 10x interfaces
OTN testing (as per ITU-T G.709)
Ethernet service activation with bidirectional EtherSAM (ITU-T Y.1564) and RFC 2544 test suites, multistream traffi c generation, Through mode and BER testing
Carrier Ethernet OAM testing covering Y.1731, G.8113.1 (MPLS-TP), MEF and 802.1ag standards
Full line-rate packet capture and advanced fi ltering from 10M to 10G
Layer-2 transparency testing with predefi ned confi gurations
True wire-speed, stateful TCP throughput test based on RFC 6349 for undisputable SLA enforcement of Ethernet services

Features

In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Related Products

IQS-2403BLD-31-P6-96 WDM Laser Source, Exfo
FTB-150 Compact OTDR, Exfo
FTB-100B Mini OTDR, Exfo

Other recommended products