Fluorescence Spectrophotometer F95S, S/N ≥90 (CAT#: STEM-AL-8824-ZJF)

The F95S is a fluorescence spectrophotometer intended for fluorescence spectral measurement and quantitative analysis. It uses selectable LED excitation and scans fluorescence emission through a monochromator. The C-T monochromator is driven automatically for wavelength scanning. A photomultiplier-tube receiver converts weak fluorescence signals into electrical measurements. The source specifies excitation bandwidth selection, emission bandwidth control, wavelength accuracy, and repeatability. USB communication and digital output support downstream spectrum and data handling. The normalized record retains only technical information supported by the source. Overall, the instrument provides an LED-based platform for routine fluorescence spectroscopy.

Sensitivity: Water Raman Peak S/N ≥90 (P-P)
Excitation Spectral Bandwidth: 10 Or 20 nm
Emission Spectral Bandwidth: 10 nm
Emission Wavelength Accuracy: ±1.0 nm
Emission Wavelength Repeatability: ≤0.5 nm
Light Source: High-Intensity LED Cold Light Source
Optical System: C-T Monochromator With Automatic Grating Wavelength Scanning
Detector: Photomultiplier Tube
Selectable Excitation Wavelength Range: 250-600 nm
Emission Wavelength Range: 200-650 nm, Expandable To 200-900 nm
Wavelength Scanning Speed: 15-48000 nm/min
Measurement Linearity: Correlation Coefficient ≥0.995
Data Output: Spreadsheet-Compatible Data And BMP Image
Data Interface: USB 2.0
Peak Intensity Repeatability: ≤1.5%

LED Excitation
Automatic Wavelength Scanning
Photomultiplier Detection
Selectable Excitation Bandwidth
Wide Emission Coverage
USB Data Communication