FFU Fan Filter Unit With HEPA ULPA Filter, 1200x600 mm, Shenzhen Snow Peak (CAT#: STEM-C-0924-ZJF)

FFU Fan Filter Unit With HEPA ULPA Filter manufactured by Shenzhen Snow Peak Clean Technology provides air filtration for cleanrooms.
Currently, the units are the most energy efficient fan filter units available on the market.
In addition to reducing energy consumption, the unit provides high volumes of HEPA (or ULPA) filtered air at low sound levels.
In a cleanroom, it is installed on the ceiling and meets the requirements of large quantities.

Type: 2x4 AC FFU
Model: SP-FK-15CAC
Module Size mm: L1200*W600
Overal size (without main filters) mm: L1174*W574*H265
Power: AC 1 PH220V 50Hz
Air volume (rated at Hi class) M3/min: 15.1±20%
Air volume range M3/min: 13/15.1/19±20%
Wind speed m/s: 0.3/0.35/0.45±20%
Total static pressure (Setting Hi class) Pa: 210
Power consumption (Setting Hi class) w: 160
Rated current (Setting Hi class) A: 0.75
Rated current range A: 0.5-1.1
Noise (rated Hi class, 1.5m directly below the main filter, A scale) dB: 52±3.0
Box vibration value um: < 25um
Weight kg: 24
Indicator light: Fault Orange, Running Green
Power switch Control box with switch: ON/OFF
Box material: aluminized zinc AL-Z/SUS 430 stainless steel

Motor Fan:
Motor: Three speeds(Lo/Me/Hi), AC inductive internal rotor motor with temperature protection switch function
Motor bearing service life: 60000 Hr
The electric power harmonic: A THD below 15%
Blade q'ty: 9
Fan type: backward-style,Corrosion resistant plastic steel fan
Dynamic balance: G2.5 class

Main Filter Element:
Size mm: W1170*L570*D70
Efficiency: against 0.3um ≥99.99%, against 0.1um ≥99.9995%
Processed wind volume: HEPA15.1CMM@98PA
Pressure drop: ULPA15.1CMM@117PA
Filter media type: Ultra thin fiberglass (MD>3500)
Frame: Anodized finished aluminum frame
Protection mesh: Anodized finished aluminum mesh(double side)
Sealing: PU glue
Gasket: EPDM material
Downstream gas release: w/o NH4+

Low operating costs due to high energy efficiency.
High capacity per unit of airflow.
A simple linear structure that is easy to install and maintain.
An inner rotor motor and direct drive aluminum leaf centrifugal fan are used to provide long life, low noise, and low vibration.
The motors are of two types: AC motors and brushless DC motors. The output static pressures are standard and high.
Various materials can be used to construct the box, such as galvanized aluminum, stainless steel, or aluminum.
Indicator lights can be used to display the current state of the equipment and to provide an alarm when abnormal conditions are present.
In all models, there is a three-setting (hi/med/lo) switch which simplifies the balancing of air.

Fan Filter Unit, 600x588x415 mm, Airteam
Fan Filter Unit, 1175x575x305 mm, Shenzhen Rongxing
Laboratory Fan Coil Unit Fan Filter, 1175x575x380 mm, Guangzhou Mecan
CleanSeal 800 2' x 4' HEPA Fan Filter Unit, 47-5/8" x 23-5/8" x 13-3/8", Class One Cleanroom Systems
HALO P, 35.1" x 23.3" x 11.9", Erlab
Pureair Fan Filter Unit, Contact For Dimensions, Pure Air Systems
Aeromech™ Fan Filter Unit, 610x610x350 mm, Aeromech Equipments