Fan Filter Unit 06/06, 480 - 562 mm x 480 - 562 mm, Lindner Group (CAT#: STEM-C-0521-ZJF)

Fan Filter Unit 06/06 manufactured by Lindner Group is a peripheral recirculating air unit with HEPA filter to hadle air in a particle-free way.
The unit is designed to remove particles in cleanroom facilities or parts of it for air cleanliness.
The unit is fully assembled for easy installation, ready for plug-in.
Ideal for cleanrooms with turbulent air flows or laminar flows up to class 3 in accordance with DIN EN ISO 14644-1.
The unit is compatible with any Lindner Reinraumtechnik cleanroom ceilings.

Length x Width (unit): 480 - 562 mm x 480 - 562 mm
Note: The dimensions depend on the type of installation in the ceiling grid.
Height (without filter): 350 mm
Air flow rate with 0,45 m/s: 355 - 526 m³/h
Weight: 21 kg
Filter class: H14
Length x Width (Filter) 455 - 570 mm x 455 - 570 mm
Note: The dimensions depend on the type of installation in the ceiling grid.
Height with dry seaL: 110 mm
Filtration efficiency: 99,995 % (mpps)
Initial pressure loss: 100 Pa
Nominal voltage: 230 V
Voltage range: 200 - 277 VAC
Frequency: 50/60 Hz
Frame size rotor: 250 mm
Fan (ebmbus)
Revolving speed: max. 3.100 min-1
Pressure reserve at 0,45 m/s: 570 Pa
Power input (starting at): max. 310 W
Current consumption: 1,7 A
Fan (modbus)
Revolving speed: max. 3.600 min-1
Pressure reserve at 0,45 m/s: 820 Pa
Power input (starting at): max. 480 W
Current consumption: 1,7 A

Options
Casing, Particle Filters, Fans, Prefilter, Heat exchanger, Diffusors, Ducting interface, EX-Protection

Decentralized unit including motor, fan and filter.
Multiple variants of controls are available for different needs.
Heat exchangers are available for combination .
This series of units have numerous sizes available.
The unit takes up very little space.

Fan Filter Unit 12/12, 1080 - 1162 mm x 1080 - 1162 mm, Lindner Group
Fan Filter Unit 12/06, 1080 - 1162 mm x 480 - 562 mm, Lindner Group