Eppendorf epMotion 5075, Eppendorf (CAT#: STEM-GLEPO-1665-ZJF)

The manufacturer of the Eppendorf epMotion 5075is Eppendorf.
The epMotion pipetting technology is based on the classic Eppendorf piston-stroke pipettes; thus, protocols previously carried out manually are easily transferred to the liquid handling robot epMotion. Its compatibility with a wide range of predefined consumables allows for the maintenance of established protocols. The required labware and liquid volumes, as well as the tip type and quantity, are checked with an optical sensor prior to each run. The easy-to-use drag-and-drop visual interface makes setting up new methods fast and simple.
The product is located in Woonsocket, RI, USA.

Condition: Certified Pre-owned
Gripper carrying capacity: 1,200 g
Operation: Electronic
Pipetting type: Air cushion systems
SLAS/ANSI positions: 12
Thermal module cooling down period of heating/cooling plate: from 25 to 4 °C in 5 minutes
Thermal module heating off period of heating/cooling plate: from 25 to 95 °C in 8 minutes
Thermal module setting range: 0-110 °C
Application: Nucleic acid purification
Volume range: 0.2 µL – 1 mL
Power supply: 100 – 240 V ±10 %, 50 – 60 Hz ±5 %
Max. power consumption: 80 W
Dimensions (W × D × H): 107 × 61 × 67 cm / 43 × 24 × 27 in
Weight w/o accessories: 85 kg / 187.4 lb

Up to 15-position worktable
Volume range from 0.2 to 1,000 µL (depending on dispensing tools used)
Automatic tool exchange for up to 4 tools
MultiCon PC controller with simulation, network and software upgrade options
Intuitive drag-and-drop-based software
Range of features can differ depending on system configuration

Eppendorf epMotion 5070, Eppendorf
Eppendorf 5242 Microinjector, Eppendorf
Eppendorf 5417R Refrigerated Microcentrifuge, Eppendorf