Ducted Fume Hood FH1000(A) (CAT#: STEM-OEM-0125-ZJF)

The Fume Hood is a protective ventilation unit that draws air inward from the room, creating a negative pressure environment to prevent the spread of toxic vapors, chemical fumes, and aerosols generated during experiments. An optional activated carbon filter can be installed to treat the exhaust before discharge, ensuring both internal and external environmental safety.

External Dimensions (W×D×H): 1040 × 800 × 2200 mm
Internal Dimensions (W×D×H): 820 × 670 × 730 mm
Work Surface Height: 850 mm
Maximum Opening: 520 mm
Air Velocity: 0.3 - 0.8 m/s
Exhaust Air Volume: 590 m³/h
Noise Level: ≤68 dB
Exhaust Duct: PVC, standard length 5 meters, Φ300 mm
LED Lamp: 8 W ×1
UV Lamp: 2 × lamps, emission at 253.7 nm for efficient decontamination
Blower: Built-in centrifugal blower, speed adjustable
Front Window: 5 mm toughened glass, motorized, height adjustable
Power Supply: AC220V ±10%, 50/60Hz; 110V ±10%, 60Hz
Power Consumption: 400 W
Material:
Exterior: Cold-rolled steel with anti-bacterial powder coating
Interior: Compact laminate board, acid and alkali resistant
Work Table: Chemical resistant phenolic resin
Standard Accessories:
2 × UV lamps, 1 × LED lamp
Water tap, gas tap, water sink, base cabinet
2 × waterproof sockets (total load ≤500 W)
5 m PVC exhaust duct, 2 × pipe straps
Optional Accessories: Active carbon filter, HEPA filter
Gross Weight: 286 kg
Package Dimensions:
Main Body: 1190 × 990 × 1690 mm
Base Cabinet: 1190 × 990 × 900 mm

UV lamp for sterilization.
Resistant to weak acids and alkalis.
9-level adjustable airflow speed.
Motorized front window, height adjustable.
Microprocessor control system with LED display.
Memory function enables automatic recovery after power failure.

STEM-OEM-0123-ZJF
STEM-OEM-0124-ZJF
STEM-OEM-0126-ZJF
STEM-OEM-0127-ZJF