Drucker Diagnostics Horizon 6 Centrifuge, Drucker Diagnostics (CAT#: STEM-LCPO-0027-ZJF)

The Drucker Diagnostics Horizon 6 Centrifuge is manufactured by Drucker Diagnostics.
The HORIZON 6 routine centrifuge makes it easier than ever to process blood and urine specimens. Its six-tube capacity and small footprint make it ideal for labs and point of care facilities where repeatability is key. Use the simple, two-button interface to program your validated cycles, or set and lock to one of three (3) preset cycles based on recommendations by tube manufacturers and the CLSI. Bright LED lid lighting is off when the centrifuge is ready to load, on when running, and flashing at the end of cycle. Horizontal and fixed angle models available.
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Height: 9 in. (23 cm)
Width: 12 in. (30 cm)
Depth: 14 in. (36 cm)
Weight: 12 lbs. (5.4 kg)
Sound Level: 64 dBA
Max. Acceleration Time: 20 Seconds
Max. Deceleration Time: 20 Seconds
Factory Setting Range: 1 to 30 Minutes (± 1%)
Voltage: 95 to 253 VAC
Frequency: 50/60 Hz
Max. Power Requirements: 220 Watts
Max Speed: 3,800 RPM
Preset Speeds:
3,600 RPM with Chemistry Preset Cycle
3,300 RPM with Coag: PPP Preset Cycle
1,900 RPM with Urine Preset Cycle

Capacity: Up to six (6) tubes
Tube Sizes: Up to 75-100 mm (3-10 mL)
Factory Presets: Three (3) easily selectable preset cycles (default or custom) based on CLSI guidelines and tube manufacturer IFU
Set and Lock Controls: The two-button interface allows users to select a cycle, or lock to a single cycle with the press of a button
Intuitive Lid Lighting: No more forgotten samples! Lid lights flash at the end of each cycle and continue flashing until the lid is opened
Automatic Lid Lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
2-Stage Horizontal Rotor: Drucker Diagnostics’ patented swing-out rotor design produces ideal horizontally separated samples
Cool Operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
Brushless DC Motor: Years of operation with no routine maintenance
Clear Shatter Proof Lid: Allows for safe sample observation and optical calibrations
Reinforced Guard Bowl: Provides maximum safety and durability
Quiet Operation: Enjoy a sound level of just 64 dBA
Regulatory Approvals: Certified to US, Canadian, and European Safety regulations and standards

ELMI Sky Line CM-6MT Centrifuge, ELMI
Thermo IEC Centra W Cell Washing Centrifuge, Thermo Fisher Scientific
Horizon Model 642E Centrifuge, Drucker Diagnostics
IEC Centra-4B Benchtop Centrifuge, International Equipment Company (IEC)
LW Scientific Ultra-8F Benchtop Centrifuge, LW Scientific
Heraeus Biofuge Pico Centrifuge, Heraeus
Quest Diagnostics Horizon Mini E Centrifuge, The Drucker Company
Hermle Z300 Benchtop Centrifuge, HERMLE Labortechnik GmbH