DMA 242 E - Dynamic Mechanical Analyzer , NETZSCH-Gerätebau GmbH (CAT#: STEM-LE-0599-LC)

DMA 242 E combines ease of operation with user-friendly measurement and evaluation software. This makes it easy and quick to characterize dynamic mechanical properties based on frequency, temperature and time. Its modular design and a variety of sample racks and cooling systems enable DMA 242 E to handle a wide range of applications and various additional options. It becomes the ideal equipment for any laboratory, and it can make a long-term safety investment.

Temperature Range:-170 °C to 600 °C
Measurement Mode(s):TMA-modes, Creep/Relaxation, Stress/Strain Sweep
Heating Rate:0.01 to 20 K/min
Frequency:0.01 to 100 Hz
Heating / Cooling Rates:Heating: 0.01 K/min to 20 K/min
Frequency Range:0.01 to 100 Hz

Easy access, handling and replacement of different sample racks
Used to optimally adjust measurement conditions to suit material properties
Under defined measurement conditions, the sample has the best heat transfer
Two different cooling systems; liquid nitrogen controlled cooling to -170°C, compressed air cooling to 0°C through vortex tube
(12 N static and 12 N dynamic) for measuring very hard samples. Increase resolution in 4 N static and 4 N dynamic range
Accurate testing can be performed on materials whose length changes substantially during DMA measurement. This is especially important for the various static experiments available with DMA 242 E

Eplexor® Series High-Force Dynamic Mechanical Analyzer