High-quality products
Reliable performance
Distribution of Foliar-applied Boron Measured by Spark-source Mass Spectrometry and Laser-probe Mass Spectrography (CAT#: STEM-ST-0262-LJX)
Introduction
The distribution of foliar-applied boron ([10B]boric acid) in radish (Raphanus sativus L.) was studied using for analysis of the stable isotopes a technique allowing a high sensitivity: spark-source mass spectrometry. Boron was recovered in the nontreated aerial parts and in the roots; however, the greatest fraction was in the treated leaf. It was possible with a laser-probe mass spectrograph to show that boron was not superficially located in the treated area but was present in tissues at all levels of depth considered.
Principle
By using vacuum spark discharge, the energy accumulated in a small volume can make the material in the volume suddenly evaporate and ionize, so as to obtain the characteristic ion current information.
Applications
(1) Solid spark source mass spectrometry: impurity analysis of high-purity materials, which can be applied to semiconductor materials, non-ferrous metals, and building materials industries;
(2) Gas isotope mass spectrometry: determination of stable isotopes C, H, N, O, S and radioactive isotopes Rb, Sr, U, Pb, K, Ar, which can be applied to geology, petroleum, medicine, environmental protection and agriculture.
(2) Gas isotope mass spectrometry: determination of stable isotopes C, H, N, O, S and radioactive isotopes Rb, Sr, U, Pb, K, Ar, which can be applied to geology, petroleum, medicine, environmental protection and agriculture.
Procedure
(1) An electric field is applied between the electrodes to ionize part of the carrier gas (such as argon) in the electric field;
(2) The "cathode ray" or "anode ray" generated by ionization accelerates in the direction of the opposite polarity in the residual gas, bombards the anode or cathode, and vaporizes a part of the substance to be measured on the plate;
(3) Part of the atoms of the vaporized substance are ionized in the subsequent discharge process.
(2) The "cathode ray" or "anode ray" generated by ionization accelerates in the direction of the opposite polarity in the residual gas, bombards the anode or cathode, and vaporizes a part of the substance to be measured on the plate;
(3) Part of the atoms of the vaporized substance are ionized in the subsequent discharge process.
Materials
• Sample Type:
Boron
Boron
Notes
Before starting the machine, check whether the water (water cooler), electricity, gas (argon/nitrogen), temperature, humidity, and exhaust air of the instrument are normal.
Other recommended products
-
Analysis of trace elements in water by spark source mass spectrometry (CAT#: STEM-ST-0268-LJX)
-
Analysis of high purity arsenic by spark-source mass spectrometry (CAT#: STEM-ST-0279-LJX)
-
Quantitative determination of nitrogen in iron by spark source mass spectrometry (CAT#: STEM-ST-0275-LJX)
-
High-sensitivity Nb analysis by spark-source mass spectrometry (SSMS) (CAT#: STEM-ST-0252-LJX)
-
-
Determination of trace elements in zinc by isotope dilution spark source mass spectrometry (CAT#: STEM-ST-0269-LJX)
-
Comprehensive analysis of soils and rocks by spark-source mass spectrometry (CAT#: STEM-ST-0251-LJX)
-
Determination of oxygen in semiconductor materials by spark source mass spectrometry (CAT#: STEM-ST-0286-LJX)
Wide range of applications
For various laboratory needs
Expert support
Professional service team
Fast delivery
Global shipping